Product Specification:
| Product Name | Smart Brightness Thermometer (BLE Version) |
| Battery Model | CR2032 Button battery |
| Wireless Protocol | Bluetooth |
| Humidity Measurement Range | 0-99% RH |
| Product Size | 66x66x11mm |
| Screen size | 45×45 mm |
Packing List:
- Thermo-hygrometer×1
- User manual×1
- Wall sticker×1
- Soft magnetic sticker×1
Application Note
- This product is intended for general consumption scenarios, please pay attention to the application scenarios of the product;
- The illuminance is restricted by the installation environment, position and angle. The brightness value detected after the product is fixedly installed is the detection value of the current position. The light sensor hole on the front of the product is close to the true value when it faces the light source vertically;
- The illumination deviation fluctuates greatly, and there will be a fluctuation deviation of about 10%;
- Make sure that the ink screen is working within the specified temperature range. If it exceeds the working temperature range, it may work abnormally. Please place it in a normal environment as soon as possible. Check the test data value after 10 minutes.
- When low battery occurs, please replace the battery in time.
- The ventilation holes of the product should not be immersed in water.
Table Place Mode:
The smart brightness thermometer can be used on the desktop.
Open the back cover halfway (at a 45° angle with the body), then the smart brightness thermometer can be stably placed on the desktop.
Magnetic Mode:
The smart brightness thermometer can be combined with soft magnetic stickers to be attached to the surface of magnetically attractable objects such as refrigerators.
Stick the soft magnetic sticker on the back area of the product, and attach the product to the surface of a magnetically attractable object such as a refrigerator.
Wall-mounted Mode:
The smart brightness thermometer can be used with wall stickers and used on the wall.
Take out the wall sticker in the package, stick the wall sticker on the selected location, and then attach the smart brightness thermometer.
Adhesive use reminder: You need to choose a place where the wall is clean and dry, and the surface is flat; after it is pasted, press it with your hand for a while to ensure that it is firmly pasted.
Maintenance:
Battery power on and replacement. Battery power-on: Open the body support, pull out the isolation sheet to power on.
Battery replacement: When the low battery icon appears on the screen, the battery power is too low, please replace the battery in time. At this time,
you need to open the body support, pry open the battery cover, and buckle the product upside down. Put the CR2032 battery into the battery
compartment with the negative electrode facing down, and then press firmly against the buckle to close the back cover.
Product Description:
The smart brightness thermometer senses the changes in the ambient light, temperature, and humidity in real time, and can actively report to the user
end. At the same time, it combines with other products to realize diversified smart home application scenarios.
Preparation for us:
Connect your phone to WIFI
Make sure that the product is within the effective coverage of the smart phone (or Bluetooth gateway) network to ensure an effective connection between the product and the smart phone (or Bluetooth gateway) network.
Network Access Setting:
Phone Connection Directly:
• After successfully installing the battery on the device, make sure that the phone is connected to the network;
• Open the Smart Life App, click the “Add Sub Device” button on the “+” page in the upper right corner;
• The device will be automatically discovered on the smartphone.
Gateway Connection:
After successfully installing the battery on the device, and ensure that the mobile phone is connected to the network and the smart gateway has been successfully added;
Open the “Smart Life” App, on the “Smart Gateway” page, click the “Add Sub Device” button.
Function Setting
• Illumination linkage suggestion: After the product is installed in a fixed position, the actual detection value is the detection environment value. For example, if the light is suitable for the environment and 100 lux is detected, then when the illuminance is lower than 100 lux, the light needs to be turned on, and the product trigger condition can be set to be lower than 100 lux or 80 lux, turn on the light in linkage.
• Temperature linkage suggestion: If the ambient temperature is higher than 30 C, turn on the air conditioner for cooling.
• Humidity linkage suggestion: if the ambient humidity is higher than 80%, linkage open the dehumidified.
Switch Temperature Unit:
The temperature unit displayed on the screen of the smart brightness thermometer can be switched between Celsius C and Fahrenheit T.
• On the device side, short press the button to switch the temperature unit between Celsius C and Fahrenheit T.
• On the APP side, you need to switch temperature unit at “Me” Page in the smart APP.
