This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found in the Radio Waves section of this user guide.
CHARGERS
Main powered chargers will operate within the temperature range of: 0°C to 40°C. The chargers designed for your device meet with the standard for safety of information technology equipment and office equipment use. Due to different applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction. They should be used for this purpose only.
Overview
LinkZone is a portable wireless router, providing a simple way to share 4G with any Wi-Fi embedded device.
Package Content:
Application:
Getting to know your device:
LED Description:
| Part | Description |
| Power key | Hold the “Power” key for 3 seconds to power the device on/ off. |
| WPS key | Hold “WPS” key for 3 seconds to activate the WPS function. Once activated, the Wi-Fi LED indicator will flash every two seconds. If the network is not accessed within 2 minutes device will automatically exit WPS mode. |
| LED indicators | Displays signal, Wi-Fi, SMS, and battery charge status. |
| Charging / USB Port | Use the USB jack to charge your device and connect your device to the client via the USB cable. |
| Reset | Hold both “Power” and “WPS” keys simultaneously for 6 seconds. All LED indicators will flash blue 4 times to indicate that the device has been reset to factory mode. |
| Reboot | Hold “Power” key for 10 seconds to restart device. |
Indicators
When the hotspot is powered on, the following icons will illuminate. For a description of the icons, please refer to the table below:
Turning On Your Device:
Step 1: Remove back cover
Step 2: Install Micro SIM Card and SD Card
Step 3: Install battery.
Step 4: Close back cover: Position the back cover so that locating nub is inserted into corresponding indentation (please refer to illustration below)
Step 5: Power device on: Long Press the “Power” key until all LED indicators illuminate in blue.
Charging Your Device:
You have two ways to charge your device.
Wall Charger:
Connect USB cable with Charger head and device, then charging begin. When the device is powered off, charging will take a maximum of 3 hours.
USB Charger:
You can also charge the device by connecting it to a PC with the USB cable. When the device is powered off, charging will take a maximum of 4 hours.
Note: In order to protect the battery, when low power LED indicator flashes, please charge the device.
Warranty:
The device is warranted against any deviation from technical specifications for a period of twelve (12) (1) months from the date specified on your original invoice. Under the terms of this warranty, you must immediately inform your vendor in case of a conformity defect on this device, and present a proof of purchase. The vendor or repair center will decide whether to replace or repair this device, as appropriate.
Repaired or replaced this device is warranted ONE (1) month unless there are statutory provisions to the contrary.
Note: To download the user manual, kindly click on the following link: