Package Content:
- AZI0 Retro Classic BT Edition
- User Guide
- Warranty Card
- USB Type-C Cable
- Keycaps for PC-specific Keys
- Cleaning Cloth
Specifications
- Model: M K- RETRO- BT- L-XX / M K- RETRO- BT-W-XX / M K- RETRO- L-02 B / M K- RETRO- L-03 B / M K- RETR0-W-01 B / M K- RETRO- BT-W-02
- Interface: Bluetooth + USB Hybrid
- Mechanical Switch: Tactile & Clicky
- N -Key Rollover: ó KR0 via USB
- Backlight: Yes (Adjustable Brightness)
- Battery: 5 0 0 0 mAh
- Rechargeable: Ye s (U 5 B Type-C Port)
- 0S Support: Mac0S & Windows
- Dimensions (LxWx H): 14 7×45 5×4 0 mm / 5.8 0x17.9 1 x 1.5 8 inches
- Weight: 6 lbs. / 2722 g
PRODUCT FEATURES:
A classic reborn:
Retro Classic is a vintage inspired mechanical keyboard that combines retro aesthetics with modern technology.
Designed to inspire:
The Retro Classic is modernized with the classic elegance of genuine leather or wood and polished aluminum frame.
Mechanical key switches:
Experience tactile and audible feed back with every key stroke, reminiscent of the vintage typewriter.
Illuminated keys:
With backlight LEDs placed at the center of every switch, each key is illuminated evenly and beautifully.
Dual connection:
Connect via Bluetooth or USB by toggling the mode switch. Both Mac and Windows layouts are supported.
Pairing the Keyboard In Bluetooth Mode:
Step 1: Switch the keyboard to BT mode. The mode switch is located on the back side of the keyboard.
Step 2: Select which Bluetooth profile to connect to by pressing the (FN) key and 1, 2, or 3 key together. For example, when pairing with Bluetooth profile 1, press the (FN) key and 1 key together. The – / $ key will flash 5 times when the profile connection is locked. For first time connections, the default profile is set at Bluetooth profile 1. (*Please refer to the bottom of the page for more details)
Step 3: Put the keyboard in Pairing Mode by pressing down the (FN) key and the – / $ key. This key is the xxx in both PC or Mac layouts. Press the (FN) key and the xxx key for a few seconds until the – / $ key goes from a quick flash to a slow continuous flash. Now, the keyboard is in Pairing Mode.
Step 4: On your Mac, navigate to ‘System Preferences’ and select ‘Keyboard’. Next, click on ‘Set Up Bluetooth Keyboard’.
Step 5: For Windows 10, go to ‘Bluetooth Settings’ and select ’Add Bluetooth or Other Device’. Once the setup wizard finds ‘AZIO RETRO CLASSIC BT’, click on ‘Pair’. Once pairing is successfully completed, the keyboard backlight will stop flashing. The keyboard is now ready for use.
Multi-Pairing Up To 3 Devices
This keyboard supports pairing of up to 3 Bluetooth devices simultaneously, with 1 profile active at a time. The keyboard default setting is at profile 1. To change, simply short-press combination keys “FN+2” or “FN+3” and follow the previous procedures to pair with other devices.
To switch between the 3 paired devices, short-press combination keys “FN+1”, “FN+2”, or “FN+3”. If there is a previous connection already established, the Bluetooth key will flash quickly for 3-5 seconds as it attempts to reconnect to the device and stop flashing once reconnected.
Charging The Keyboard
When the battery is less than 20%, the ESC key will start blinking in red. Plug the included USB cable into the keyboard and plug the other end to a USB port or a USB charger. The same LED will stop blinking and light up a steady red, indicating the keyboard is charging. Once fully charged, the red LED will turn back to white. Charging a completely drained battery to full on a USB 3.0 port will take approximately 8 hours due to its large power capacity. Actual charging time may vary depending on the power output of the charging source. The keyboard can be charged in any mode – BT, USB, or OFF mode.
Battery Power Level
To check the battery power level of the keyboard, press FN+ESC key. The LEDs ranging from F1 to F10 will light up, each key indicating 10% of total power. So if all 10 keys light up, this indicate the keyboard battery is 100% full.
Device Layout – Back:
MAC/PC Modes:
By default, the keyboard will be in Mac mode. To change it to PC mode, please toggIe the switch to “PC” position. Once in PC mode, replace the Mac key caps with the included PC key caps according to the diagram on the DEVICE LAYOUT section.
Interface Modes:
BT: Bluetooth mode allows you to con nect the keyboard to your computer wireles sly. I n BT mode, the backlight will automatically turn off after 5 minutes of inactivity to conserve battery
USB: In USB mode, please connect the included USB Type-C cable to the keyboard and your computer.
LED Indicator Abbreviations
N: Steady White Light / Number Lock (PC mode)
C: Steady White Light / Caps Lock (Mac & PC mode)
S: Steady White Light / Scroll Lock (PC mode)
W: Steady White Light / Windows Key Lock (PC mode)