Special tips:
- Before installation and operation, please read this operation manual carefully.
- Please save this manual for future reference.
- Product may vary slightly from the item pictures due to model upgrades.
IMPORTANT SAFETY INSTRUCTIONS:
- Install the treadmill on a flat level surface with access to correct voltage and frequency, grounded outlet.
- Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and treadmill may result.
- Do not block the rear of the treadmill. Provide a minimum of 1 meter clearance between the rear of the treadmill and any fixed object.
- Place your unit on a solid, level surface when in use.
- Never allow children on or near the treadmill.
- When running, make sure the plastic clip is fastened on your clothing. It is for your safety, should you fall or move too far back on the treadmill.
- Keep hands away from all moving parts.
- Never operate the treadmill if it has a damaged cord or plug.
- Keep the cord away from heated surfaces.
- Do not operate where aerosol spray products are being used or where oxygen is being administered. Sparks from the motor may ignite a highly flammable environment.
IMPORTANTELECTRICAL INFORMATION:
- NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels.
- NEVER operate treadmill on Generator or UPS power supply.
- NEVER remove any cover without first disconnecting AC power.
IMPORTANT OPERATION INSTRUCTIONS:
- Insert the power plug into the socket directly.
- The constant running time is less than 2 hours. Be sure to read the entire manual before operating your machine.
- Understand that changes in speed and incline do not occur immediately. Set your desired speed on the computer console and release the adjustment key. The computer will obey the command gradually.
- Use caution while participating in other activities while walking on your treadmill; such as watching television, reading, etc. These distractions may cause you to lose balance or stray from walking in the Centre of the belt; which may result in serious injury.
- In order to prevent losing balance and suffering unexpected injury, NEVER mount or dismount the treadmill while the belt is moving. This unit starts with a very low speed. Simply standing on the belt during slow acceleration is proper after you have learned to operate this machine.
- Always hold on to handrail while making control changes.
Assembly Instructions:
When you open the carton, you will find the below spare parts:
Parts List:
| NO. | DES. | Specification | Nos. |
| A | Main frame | 1 | |
| B | Console base | 1 | |
| A08 | LEFT UPRIGHT TUBE | 1 | |
| A09 | RIGHT UPRIGHT TUBE | 1 | |
| C03 | LEFT UPRIGHT TUBE BOTTOM COVER | 1 |
Hardware:
IMPORTANT ELECTRICAL INFORMATION:
WARNING: This treadmill requires a right power source in order to properly operate. For your safety, as well as the safety of others, please verify that the power source is correct before plugging the equipment. Any incorrect power source could cause significant damage to the equipment and or user.
GROUNDING METHODS:
This product must be grounded. Grounding provides the least resistance for electrical current and will reduce the risk of electric shock. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Ensure that the product is connected to an outlet which contains the same configuration as the plug. Do not use an adaptor for this product. This product is for use on a nominal circuit and has a grounding plug that looks like the plug illustrated in sketch A. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.
OPERATION GUIDE:
BUTTON FUNCTIONS:
- INSTANT INCLINE: Press 0-6-15 to choose incline quickly.
- INCLINE+/INCLINE-: Press + button to increase the incline, press – button to decrease the incline.
- PROGRAM: Press this button to choose 24 programs, 3 users, 3 HRC and body fat.
- STOP/PAUSE: Press this button to either pause or stop the machine.
- FAN: Press this button to turn on/off the fan.
- START: Press this button at any time to start the machine.
- MODE: Press this button to select countdown mode for time, distance, calories workout targets.
- SPEED+/SPEED-: Press + button to increase the speed, press – button to decrease the speed.
- INSTANT SPEED: Press 5/3,10/6,15/9 to choose speed quickly.5-10-15 is km/h, and 3-6-9 is mph;
BLUETOOTH CONNECTION:
- BLUETOOTH MUSIC: The user can connect your device to the treadmill by Bluetooth name Reebok to play the music. Adjust the volume of music from your device directly. Once the connection is done, the indicator light will be on.
- BLUETOOTH DONGLE: Insert the DONGLE to the port on back of console, use the APP with connection of Bluetooth by name of REEBOK code. Once the connection is done, the indicator light will be on.
USB CHARGING:
USB CHARGING: Device charging, charging port is on the back of console.
COMPUTER FUNCTIONS:
- QUICK START: Press START, the system will count down for 3 seconds, and start moving. 2.PAUSE/STOP: Press this button to either pause or stop the machine. Take out the safety key to stop the working of the treadmill, or press STOP two times.
3.Press SPEED+/- to adjust the speed of the machine.
4.Press INCLINE+/- to adjust the incline of the machine.
5.MODE: Press MODE to enter countdown for TIME, DISTANCE, CALORIES.
- Press SPEED+/- or INCLINE+/- to set the workout target value.
- Press START button, treadmill will move after 3 seconds.
- Press SPEED+/- and INCLINE+/- to adjust the speed and incline.
6. PROGRAM: Press P button, you can choose 24 programs, 3 users, body fat.
HOW TO TRANSFER BETWEEN KPH TO MPH
Under standby mode, insert safety key, press SPEED + and INCLINE+ buttons together and hold on about 5 seconds until you hear one sound, and then you can finish the transfer between kph and mph.
LUBRICATION REMIND FUNCTION
This machine has lubrication remind function. After every total running distance of 300km (188miles), your treadmill needs to be maintained with oil. The system will remind with sound for every 10 seconds, and window will show “OIL”. This means that your treadmill needs to be lubricated with oil. Please read the user’s manual first, and add the oil to the middle part of running board. After you finishing lubrication, please hold on “STOP” button for 3 seconds, and the system warning sound will disappear.
SAFETY LOCK FUNCTION:
Under any mode, if you pull away the safety key, the machine will stop. The window will show “—” with reminding sound. The machine cannot work until safety key is inserted back.
MAINTENANCE & CARE:
General cleaning will help prolong the life and performance of your treadmill. Keep the unit clean and maintained by dusting the components on a regular basis. Clean both sides of the running belt to prevent dust from accumulating underneath the belt. Keep your running shoes clean so that dirt from your shoes does not wear out the running board and belt. Clean the surface of the running belt with a clean damp cloth.
- To better maintain the treadmill and prolong its life it is suggested that the machine be powered off for 10 minutes every 2 hours and fully powered off whenever not in use.
- A loose Running Belt will result in the runner sliding off when running, while too tight of a Running Belt will result in decrease to the motors performance and also create more friction between the roller and running belts. The most suitable tightness for the belts is pulled out 50-75mm from the Running Board
Note: To download the complete user manual, please download the following instructions: