Pairing the Controller
The first time you use the controller or when you want to use the controller on another PlayStation®4 system, you must pair the controller and PS4™ system. Turn on the PS4™ system and connect the controller with the USB cable to complete pairing.
Controller Light Meanings
When you press the (PS) button, the controller turns on and the light bar glows in your assigned color. The color that is assigned depends on the order in which each user presses the PS button. The first controller to connect is blue, with subsequent controllers glowing red, green, and pink.
Charging the HYPER PS4 Controller
With the PS4™system turned on or in rest mode, connect the PS4™ system and the controller using the USB cable.HintYou can also charge the controller by connecting the USB cable to a computer or another USB device. Use a USB cable that complies with the USB standard. You might not be able to charge the controller on some devices.
Battery Information
- The battery has a limited lifespan. Battery duration will gradually decrease with repeated usage and age. Battery life also varies depending on the storage method, conditions of use and environmental factors.
- Charge in an environment where the temperature range is between 10 °C and 30 °C. Charging may not be as effective when performed in other environments.
- When the wireless controller is not used for an extended period of time, it is recommended that you fully charge it at least once a year to help maintain battery functionality.
Battery Specifications
- Input power: rating DC 5 V, 800 mA
- Battery type: Built-in lithium-ion battery
- Voltage: DC 3.65 V
- Battery capacity: 1000 mAh
- Operating temperature: 5 °C to 35 °C
- Mass Approx: 210 g
Removing/Replacing Battery
The lithium-ion battery of the wireless controller is recyclable. When disposing of the wireless controller, remove the battery and follow local regulations regarding disposing of batteries.
Remove the battery in a location out of the reach of small children to help prevent accidental swallowing of small parts such as the screws. Be careful not to hurt your nails or fingers when removing the controller casing.ˎFor safety reasons, attach tape or a seal on the metal part of the battery before disposing.
STEP ONE: Disconnect the USB cable from the wireless controller.
STEP TWO: Using a crosshead screwdriver, remove the screws (4 places).
STEP THREE: With the front of the controller pointing up, press in the direction of the arrows to open the cover.
STEP FOUR: With the rear of the controller pointing up, remove the cover.
STEP FIVE: After disconnecting the connector, remove the battery.
