Powering On the master speaker
Use the supplied mains adaptor to connect to the DC IN socket at the back of the unit and insert the plug into your household outlet. The red power indicator lights up, voice prompt “POWER ON”, device power on.
Note: Check the rating plate on the AC/DC adapter with your mains power voltage before powering the speaker on.
2. After 5 minutes without any operation, the speaker will automatically turn off the power.
Powering On the slave speaker
- A 7.2V 5200mA DC rechargeable lithium battery is included with the speaker.
- When the lithium battery is low, the red LED indicator flash. You can use USB cable to charger the lithium battery.
- Use a TYPE C USB cable to plug one end with USB into the computer USB port. Plug the other end with TYPE C USB into TYPE C USB jack of the unit. It will start to charge the Lithium battery automatically when your computer is ON.
- You can also use a TYPE C USB cable and charger to charge the device.
3.While charging, the CHARGING indicator light is always on. It will turn off when the battery is fully charged.
NOTE: Before the first use, we recommend you charge the Lithium battery for 6 – 8 hours. Please do not charge the battery longer than recommendation as it will shorten the battery life.
Listening to music by Bluetooth
- Long press Power button for 2 seconds, device power on, blue LED indicator flash, enter Bluetooth pairing.
NOTE:
- Automatically enter Bluetooth pairing after power on
- It will automatically reconnect
2.Turn on the Bluetooth function on your external device
NOTE: The effective distance between your external device and this speaker is 10 meters (33ft.)
3. Wait moment for “Get Together Duo.” to appear on the device list. Press “Get Together Duo.” to connect the speaker.
NOTE: Sometimes a window will ask you for a pass word. Fill in “0000” then press “OK” on your external device.
4. After the Bluetooth pairing successful, voice prompt “PAIRED”, the blue LED indicator always lights up. Then you can select what you want to play on the external device.
5. Short press VOL+/ VOL – adjust the volume increase/decrease volume. 16 steps adjustable for volume level
NOTE: First power on for using, the default volume is 60%, after first usage, the volume will memory the last time setting. Adjusted to the maximum volume, there will be a prompt tone.
6. Long press VOL + or VOL – for 2 seconds it for the Next/previous track
7. Short press Bluetooth button music play/pause
8. Long Press Bluetooth button & VOL- together for 2 seconds, disconnect current Bluetooth paired device and enter into Bluetooth pairing mode, blue indicator flash.
NOTE: Bluetooth paired, if no audio output, 15 min device will power off automatically Bluetooth not paired 5 minutes will power off automatically.
Language selection
Long press BT Button & VOL+ together last for 2S for language selection
Restore factory setting
Long press BT Button & VOL+ together last for 10S for restore factory setting.
