Transmitter Feature Diagram:


Install Batteries:
- Remove the battery cover from the transmitter
- Install 4 AA alkaline dry cell batteries
- Insert the 4 AA batteries according to the polarity
- Replace the battery cover
Basic Operation:

Transmitter Binding:
Each transmitter is assigned with a random unique ID number. In order to begin using the transmitter system you will have to bind the receiver to the transmitter. Follow the receiver binding instruction.
Lock/Unlock key button:
Lock key button
- Push the “D/R” switch key toward to right
- While holding the D/R switch to right, turn the transmitter power switch to On
- Two short “beep” sound indicate conformation.
- The LED light flashes
- Now all key button function Locked

Steering Adjustment
Servo Reverse
- Press and hold “ST R/+” key button
- While pressing “ST R/+” key button, turn on the transmitter power switch
- Two short “beep” sound indicate conformation
- Now the steering has reversed.
- Steering End Point Adjustment
Left Steering End Point Adjustment
- Turn the steering wheel fully to left
- Once the value reaches the limit, a long steady “beep” will sound
Decrease value: Turn the steering wheel fully to left and press “ST/L-” key button
Increase value: Turn the steering wheel fully to left and press “ST/L+” key button
3. Use this to performing steering angle adjustment 7 decrease or increase.
- Dual Rate Steering Adjustment
Decrease: Push the “D/R” button key to left Increase: Push the “D/R” button key to right
- Once the value reaches the limit, a long steady “beep” will sound
- Steering dual-rate allows on-the fly travel adjustment to both sides (left and right) of the steering servo.
Throttle Adjustment
Throttle Reverse
- Press and hold ST L/- key button.
- While holding ST L/- button key turn the transmitter power switch to On
- Two short “beep” sound indicate conformation
- Now the throttle trigger has reversed.
Throttle (Accelerate):
- Pull and hold the throttle trigger fully to the high-side
2. Once the value reaches the limit, a long steady “beep” will sound
Decrease: While holding the throttle tngger, press TH Rev/- key button
Increase: While holding the throttle trigger, press TH Fwd/+ key button
3. Use the TH Rev/- or TH Fwd/+ key buttons to adjust the throttle to desired throw
4. This can also be performing when the receiver power is off.

Auxiliary Channel 3 Adjustment
Reverse
- Press and hold the “CH3” key button
- While turn on the power switch
- Two short “beep” sound for conformation
- Now the Channel 3 has reversed.
Turn On or Off CH3 Switch
- With two quick press the CH3 key button.
- Turn-On: Two short beep sound
- Turn-Off: One short beep sound
2. This function allow to turn On/Off the CH3 key-button.

Factory Reset:
Factory Default Setting:
- Press and hold the “TH Rev/-” key button
- While holding the “TH Rev/-” key button turn the transmitter power switch to On
- Two short beep for conformation
- Now your transmitter has reset to the factory setting.

Specification:
Transmitter | Receiver |
Channels:3 | Antenna: Do not roll antenna up |
RF: ISM Band (2.4 GHz) | CH 1: for steering servo |
Power: DC6V | Ch 2: For ESC |
Blue LED: Indicators | Ch 3: AUX |
Color: Black | Power: DC 4V- DC 9V |
Note: To download the complete user manual, kindly download the following file: