Setup and use your digital video baby monitor:
Installing Baby Unit:
- Place Baby Unit on a flat surface, such as a desk or shelf or mount the camera on a wall.
- Connect the small plug of the power adapter to the Baby Unit and the other end to a suitable electrical outlet. Only use the enclosed adapter (5V DC 1000mA). The baby unit is turned on and the power LED will be green.
- Connecting the power supply for the Parent Unit. Connect the small plug of the power adapter to the parent unit and the other end to a electrical outlet. Only use the enclosed adapter (5V DC/1000mA). Recommend charging time of at least 3 hours before first use.
Precaution: use of battery for Parent Unit.
Only charge the battery when the battery life indicator is low. Constant
recharging of your battery before the low battery indicator light comes on will decrease the life of your batteries.
When battery is low, the power on off LED (icon) will flash red and on screen display battery icon will flash red indicating that the battery needs to be charged.
Notice:
If you use the parent unit for the first time, when you turn on the parent unit, some boot menus will pop-up on the screen, we try to explain status and function on these menus, please according to the tips to switch to the monitor system interface. When you are familiar with
this monitor, you could switch off these on screen tips in menu.
Function of keys and LED indicators:
Sound Level indicator
Visual indicator for sound picked up from baby unit. The louder the sound is from Baby unit, the more LEDs are light on.
Power on off status LED:
- Steady green: Power unit is powered on
- Steady Orange: Charging battery
- Flash Red: Battery low.
Short cut to switch camera view
Press this key to view camera 1, camera 2, etc. and paired camera.
Battery Warning:
- Use only the original rechargeable battery provided.
- Do not shot-circuit supply terminals.
- Remove battery when product is stored for long periods of time or when battery is exhausted.
- Dispose of exhausted battery properly.
- Keep all batteries away from children.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
- Danger of explosion if battery is incorrectly replaced. Replace only with the same batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Precaution:
- The baby monitor works better in temperature ranging between 0℃ and 40℃(32℉ and 104℉).
- Do not dismantle the appliance. It does not contain any parts that may be used independently.
- Never Expose the baby monitor for long period to sun’s direct rays and never place it next to a source of heat, in a damp or very
- dusty room.
- Never push objects of any kind into this product through openings they may touch dangerous voltage points or short-out parts
- that could result in a fire or electric shock. Never spill liquid of any kind on the product.
- Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
- The product should be mounted to a wall or ceiling inly as recommended by the manufacturer.