Kichler Lighting Smart WIFI Socket User Manual

by

PARTS LIST

  • Male Threaded Portion of Antenna
  • Nylon Knock-Out Gasket
  • Lock Washer
  • Flat Washer
  • Nut
  • Antenna
  • Smart Control Timer
  • Side Receptacle

Part Diagram

Part Diagram
WIFI Socket Outlook

CAUTIONS

CAUTION – RISK OF SHOCK –

Disconnect Power at the main circuit breaker panel or main fusebox before starting and during the installation.

WARNING:

This device is intended for installation in accordance with the National Electrical Code (NEC) and all local code specifications. If you are not familiar with code requirements, installation by a certified electrician is recommended.

CLEANING:

Always be certain that electric current is turned off before cleaning.

Only a soft damp cloth should be used. Harsh cleaning products may damage the finish.

INSTALLATION INSTRUCTIONS

NOTE: Smart Control Timer should be installed to transformer prior to setting up and using the

Kichler Connects App.

  1. Turn off power to the transformer that the Smart Control Timer will be installed in.
  2. Open the transformer door and unplug internal power cord.
  3. Remove Smart Control Timer[G] from packaging & plug it into the internal transformer receptacle.

4. Install the included antenna:

  • Using a flat blade screwdriver and pliers, remove a knock-out blank from transformer housing, being careful not to scratch the transformer body.

NOTE: We recommend removing a knock-out hole on side of transformer closest to the Wi-Fi Router.

NOTE: DO NOT use the knock outs on the bottom of transformer housing.

  • Insert nylon knock-out gasket[B] into knockout from the exterior of the transformer.
    • Remove nut[E], flat washer[D], and lock washer from the male threaded portion of the antenna[A].
    • Insert the male threaded portion of the antenna[A] through the nylon lock-out gasket[B].
    • Place lock washer[C] and flat washer[D] onto male threaded portion of the antenna[A], then thread on nut[E]. HAND-TIGHTEN ONLY. DO NOT OVER-TIGHTEN.
    • Thread antenna[F] onto male threaded portion of the antenna[A].
    • For best reception, ensure that the antenna[F] is upright with respect to the transformer.
  • Plug internal transformer cord into side receptacle[H] on the Smart Control Timer.
  • Turn power to transformer back on.

Download the Kichler Connects App from the Apple App Store or Google Play and follow Quick Start App Installation instructions to connect your device.