Packing List:
- Host*1
- Remote ControI*1
- water tank*1
- Battery*2
- Charging base*1
- Disposable mopping cIoth*10
- Adapter*1
- ManuaI*1
Product Description:
Host:
Host and sensor:
Instruction for use:
Power on/off:
Press and hold the power button to power on, and the host enters the standby state. After booting, press and hold the power button to shut down.
Note: When the host is charging on the charging stand, it will automatically turn on, and it cannot be turned off during charging.
Start/pause:
Under the power on state, short press the “ U ” button to start the whole house cleaning. Press any key to pause while cleaning.
Note: It is recommended that the sweeping robot start cleaning from the charging stand;
When the battery is too low, the cleaning will not start. Please charge and then start cleaning.
When the power is insufficient during the cleaning process, the host will automatically return to the charging dock for charging. After the battery is fully charged, it will automatically return to the interruption to continue cleaning.
Charging
Automatic recharge: The host will automatically return to the cradle to charge after the cleaning is completed or when the battery is insufhcient.
Manual charging: Press the power button to start recharging; after the main unit is powered off, you can manually put the main unit back into the charging stand to charge.
Note: Please make sure the charging pole piece is in good contact.
Sleep
If there is no operation for more than 10 minutes, the host will automatically enter into sleep state.
Note: The host will not enter the sleep state when charging; Automatically shuts down after sleeping to no power.
Connect to the mobile client:
- The phone is connected to WiFi.
- Scan the QR code below, or search for “ProscenicHome” in the mobile app store to download the app, register and login to the account.
- Add device on the home page choose sweeping robot”M7 PRO”;
- Press and hold the “@* ” and “ @” keys for 5 seconds to enter the network configuration.
- Select the connected WiFi of the phone and enter the WiFi password.
- Go to the mobile phone WLAN list and select and connect the “Proscenic—XXXX” device hotspot.
- Return to the APP and wait for the distribution network to complete.
Remote control:
Note:
- To ensure remote control effectively, it is recommended to use it in the front area of the main body;
- The effective distance of the remote control is 8 meters.
Water tank:
If you need to mop the floor, you can use the water tank. Note: Do not mop the floor on the carpet to avoid wet carpet. Wet the mop with water, attach the mop cloth to the Velcro and tighten it, fill in the water through the water inlet, and close the rubber cover.
Routine maintenance:
Dust box and filter assembly:
- Press the dust box release button to remove the dust box.
- Open the dust box, and dump out the garbage
- Open the dust cover and remove the filter such as HEPA and sponge.
- Shake off the trash on the filter net and use a cleaning brush to clean the dust box and filter.
- After filling clean water into the dust box, shut off the dust box and shake it to the left and right, and pour out the dirty water. Repeat this step several times until the dust box is cleaned.
- After drying the filter and dust box, replace the filter and dust box.
Side brush (recommended weekly):
- Use a screwdriver to unscrew the 2 side brush screws and remove the 2 side brushes.
- After cleaning the wrap hair and rubbish on the side brush, replace the side brush.
Note: Depending on the application, it is recommended to replace the side brush for 3—6 months to ensure the cleaning effect.
Universal wheel
(recommended monthly cleaning)
- Flip the main unit and pull out the universal wheel upwards;
- Clean the hair and dust on the wheel, axle and support;
@ Reinstall the universal wheel and press it tight.
Note: Wash with water, dry it and put it back.
Host:
| Name | Parameters |
| Dimensions | 350mmx350mmx80mm |
| Product Weight | 3.6kg |
| Rated Voltage | 14.4 V |
| Rated power | SOW |
Charging Stand:
| Dimension | 145mmx140mmx99mm |
| Rated Power | 30W |
| Rated input | 24V |
| Rated output | 24V |
Common Problem:
| Question type | Solution |
| Can not boot | The battery is low, please charge it before using it Ambient temperature is too low (less than 0°C) or too high (higher than 50°C) |
| Unable to start cleaning | The battery is low, please charge it before starting it |
| Unable to recharge | There are too many obstacles near the charging stand. Please put the charging stand in the open area The host is too far from the recharge seat. Please try to place the main unit near the charging stand |
| Abnormal behavior | Reboot after shutdown |
| There is abnormal noise during cleaning | Roller brush, side brush or left/right wheel may wrap foreign objects, please clean after shutdown |
| Decrease in cleaning ability or falling out from machine | The dust box is full, please clean the dust box HEPA components have been blocked, please clean up The roller brush is wrapped by foreign matter, please clean the main brush |
| Unable to connect to WiFi | WiFi signal is not good, please make sure the host is in a good WiFi signal coverage area WiFi connection is abnormal, reset WiFi and download the latest app Try to connect again |
| Breakpoint cleaning | Please confirm that the host is not in the do not disturb mode, it will not continue to clean in this mode Manually recharging or putting the main unit back into the charging stand will lead the machine not to continue cleaning from last interruption |
| Cannot return to the charging stand after spot cleaning or moving the position | After spot cleansing or long—distance moving position, the host will re—generate the may. If the charging stand is far away, it may not be able to automatically recharge. Please manually put the host6ack into the charging stand to charge |
Note: To download the complete user manual, kindly download the following file:
