OPERATING SYSTEM
- Microsoft Windows 7
- Microsoft Windows 8
- Microsoft Windows 10 and higher
| Key numbers | 6 buttons |
| DPI Resolution | 800, 1300, 1600 DPI |
| Report Rate | 125 times/sec |
| Rated Voltage / Current | 50mA |
| Dimension | 116.3 (L) x 82.5 (W) x 53.4 (H)mm |
| Weight | About 102.5g (battery not included) |
Forward
Press to view the next page in the Internet browser
Backward
Press to view the previous page in the Internet browser
Hyper Fast Scrolling (Two scrolling modes)
Press and push down the scrolling wheel to switch from Normal Scrolling & Hyper Fast Scrolling modes
* Default is Normal Scroll *
SETUP YOUR WIRELESS MOUSE
Step 1: Take the BATTERY COVER off
Step 2: Insert the batteries as shown inside the battery storage
Step 3: Replace the battery cover
Step 4: Insert the Nano Receiver into your computer USB port
Step 5: Turn on the Power Switch
Step 6: Your mouse will connect automatically, letting you use your mouse wirelessly.
SETUP THE CONNECTION BETWEEN YOUR WIRELESS MOUSE AND COMPUTER:
If your wireless mouse has not been connected to your computer after completing the previous steps, the following information will help you to complete the connection
- Turn off and then turn on the mouse again
- Make sure the computer is turn on
- Insert the Nano receiver and press the middle click and the right click at the same time
- The LED indicator will start flashing and start pairing with the Nano receiver on the computer
- Your mouse will connect automatically
DPI ADJUSTMENT
| Press DPI switch | |
| LED indicator flashes once | 800 DPI |
| LED indicator flashes twice | 1300 DPI |
| LED indicator flashes 3 times | 1600 DPI |