Pheanoo P27 Stereo System User Manual

by

Important Safety Instructions:

  1. Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
  2. Do not use this apparatus near water.
  3. Clean only with dry cloth.
  4. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  5. Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat.
  6. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
  7. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles or at the point where they exit from the apparatus.
  8. Only use attachments/accessories specified by the manufacturer.
  9. Unplug this apparatus during lightning storms or when unused for long periods of time.

Preparation for Use:

Unpacking and Set Up

•Remove the Sound bar from the carton and remove all packing material from the Sound bar. Save the packing material, if possible, in case the Sound bar ever needs to be serviced or transported. The original carton and packing material is the only safe way to pack your Sound bar to protect it from damage in transit.

•Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet.

•Place your Sound bar on a level surface such as a table, desk or shelf, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration.

•Unwind the Line cord connecting the AC adapter and extend it to its full length.

Stereo Shape

Protect Your Furniture

This model is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the furniture.

Back view of display

Power Source

This sound bar is designed to operate on normal AC Power source. For Europe, it works only under SMPS 110V-240V～50hz/60Hz. Do not attempt to operate the Sound bar on any other power source. You could cause damage to the Sound bar that is not covered by your warranty.

Power Supply

Important Notes:

  • This sound bar was especially developed for LED/LCD/Plasma TV’s: It should not be used in combination with CRTTV’s (Cathode Ray Tube TV’s) in order to avoid image interference.
  • Safety and operating instruction manual should be retained for future reference.
  • The apparatus should not be exposed to dripping, splashing or placed in a humid atmosphere such as a bathroom.
  • Do not install the product in the following areas:
  • Places exposed to direct sunlight or close to radiators.
  • On top of other stereo equipment that radiate too much heat -Blocking ventilation or in a dusty area.
  • Areas where there is constant vibration.
  • Humid or moist places.
  • Do not place near candles or other flames.
  • Operate the product only as instructed in this manual.
  • Before turning on the power for the first time, make sure the sound bar is plugged to power outlet.
  • For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.

Product Diagram:

Product Diagram

Remote Control:

Remote Control
  1. Standby mode for power on/off button
  2. PAIR: Connect or disconnect to the pairing device. (Press the button more than 2 seconds.
  3. Volume+: Mastervolume up
  4. Pre button: Previous program (Only work under USB & BT mode of smartphone).
  5. Volume -: Mastervolume down
  6. Music: Select the music WQ effect
  7. TR+: Treble volume up.
  8. TR-: Treble volume down.
  9. MUTE: Mute mode.
  10. INPUT: Input mode(AUX/USB/HDMI TV(ARC)/OPT/BT).
  11. Next button: Next program. (Only work under USB & BT mode of smartphone).
  12. Play/Pause (Only work under USB & BT mode of smartphone).
  13. Movie: Select the movie EQ effect
  14. News: Select the News EQ effect
  15. Bass: +
  16. Bass: –
  17. 3D: Select the 3D EQ effect.
Remote Control

Positioning the Sound Bar:

Place on a flat Surface:

Place the sound bar horizontally on a flat surface such as a TV unit or shelves and align it centrally with the TV screen. Allow some space between the speaker and the wall. Don’t place inside a cabinet or an a walled shelf. Follow this guidance for best sound output and good airflow around the sound bar.

Place on a flat surface

Mount on the wall:

WARNING: If you don’t feel confident to correctly and securely wall-mount the sound bar, Seek the assistance of an experienced person of professional.

Install the speaker on a vertical, fast, reinforced area of wall. For plaster walls, it is recommended to screw into wall studs for greater security. For optimum performance, allow at least 25mm/1’’distance between the sound bar and the TV.

Mount on the wall

Follow below steps to mount the sound bar on the wall:

  1. Make 2 holes on the wall with distance same as the wall bracket on the soundbar
  2. Put the plastic anchors onto the wall and secure the screws to the plastic clip, do not tighten the screws all the way make sure leave some space
  3. Attached the 2 EVA pads onto the wall mount bracket. This will make sure that there is enough room between the wall and the sound bar outlet, minimum 15mm.
  4. Once the screws securely fastened, hang the sound bar over by inserting the screws onto the wall mount bracket.
First two steps of wall mount
Last two steps of wall mount

OPERATE INSTRUCTIONS:

Setting the Soundbar:

  1. Plug in the power cord and the display will light up (Standby mode)
  2. Switch on the sound bar by using power button on sound bar or by using STANDBY button on remote. After switching on, the default input mode will appear on display.
  3. lnput mode can be changed by pressing the power button again or by using the INPUT button on remote
  4. Below are input mode names appearing in the sound bar display:

BT: Bluetooth pairing mode

AU: Aux mode

Op: optical mode.

HD: HDMI mode

Powering On/Off:

6. Plug the sound bar into a wall outlet, it will automatically enter standby mode

7. Short-press the multi-function button to turn on the sound bar

8. To turn off, press and hold the multi-function button for 2 seconds or unplug from wall outlet.

Playing Audio via BT Connection:

Turn on sound bar and then short-press the multi-function button to switch to BT mode and the LED will show

  • Activate the pairing function on your phone of other compatible device and select“ P27 ”
  • When successfully paired, you will hear a tone and the LED Display will stay on
  • The remote control includes BT mode playback controls

Notes:

  • If your Pairing device Switched off or Manual disconnected, the sound bar will automatically enter pairing mode
  • If the connected device is switched off or manual disconnected, the sound bar will automatically enter pairing successfully connected device will be re-established once you re-enter wireless range(10 meters). to connect to other devices, repeat the above pairing steps.

AUX mode:

  • Connect the sound bar to your PC, tablet, smartphone, TV, of other device using the included audio cable short-press the multi-function button to switch to audio input mode with the LED Display lit up (AU).
  • In this mode, playback can only be controlled on your connected device.

Specifications:

ModelP27
TechnologyBT/AUX/HDMI TV(ARC)/OPT/USB
Drivers2.75inch*2 + 5.25inch
Audio Output Power30W*2+60W=120W R.M.S.
Frequency Response45Hz-20KHz
Signal-to-Noise Ratio72dB
lmpedance4Ω*2+6Ω
Power lnput110V-240V~50Hz/60Hz
bluetooth VersionVersion: 5.0 Range:up to 10m
DimensionsSoundbar: 860W*76H*78D mm Subwoofer: 115W*420H*250D mm
Bluetooth Frequency2402MHz – 2480MHz