Main features:
- Remote Range 800m.
- The receiver comes with flashing LED light for easy training and searching for your dog.
- The flashlight is designed for night lighting.
- Various dog training modes are adjustable, and users can choose the training level suitable for dogs according to their different size dogs.
- 0 Up to 3 dogs can be trained on the same transmitter (need to purchase a receiver separately)
Transmitter description:
How to use it:
Charging operation instruction:
Receiver low voltage hint: when in low voltage state, The red light flashes five times every twelve seconds.
Transmitter low voltage hint: when its voltage is low, the indicator light flashes five times every 2 seconds, meanwhile, the battery in the screen displays 1 cell at the same time.
Charging requirements:
•The data cable is Micro USB
•Output voltage :DC5V
•Charge the battery completely before the first use (this may take up to 2 hours).
•Do not charge the battery near flammable substances.
Receiver Charging State:
The brightness of red light slowly lighten when charging, and when fully charged, green light will flash.
OPERATING INSTRUCTIONS FOR VARIOUS FUNCTIONS OF THE PRODUCT:
Power on-off:
Power on receiver:•Turn on by pressing the power button for 3 seconds
•The two Blue indicators will be on for 3 seconds when On meanwhile vibrates 1 second.
•The green light flashes once every 10 seconds when the receiver is ON
Power off receiver:
•Turn Off by pressing the power button for 3 seconds
•The two Red indicators will flash 3 times when Off meanwhile vibrates 1 second
The receiver is paired with the transmitter:
- Press any button to activate the transmitter
- Choose a channel CH1,CH2 or CH3 by pressing the CH button
- Adjust the level by pressing + or — button , make sure the level above 00
- Turn on the Receiver, then press the power button 3 times in a row, the LED indicator on receiver will flash red, and is now in connection mode for approx. 20 seconds.
- Press any of the function buttons(Tone, Vibration, Static stimulation) on transmitter to complete the connection. If the connection is successful, the LED indicator on the receiver lights up blue 3S,and a double beep sounds
- If you have 2 or 3 Receivers, just choose the different channels ,and pair as the above steps.
Static Stimulation function level adjustment operation:
If you press and hold the button, the static stimulation will continue. If more than 10S, it will stop work until the button is released. The LED indicator will flash red.
Tone function level adjustment operation:
Delivers audible tone to the receiver,Tone will produce a time-out after pressed continuously for 15 seconds and will not deliver the command until the button is released.The receiver flashes a green light while working ,time length is synchronized.
Vibration function level adjustment operation:
If you press and hold the button, the vibration will continue. If more than 15S, it will stop work until the button is released. The LED indicator will flash blue.
Tone function level adjustment operation:
Delivers audible tone to the receiver, Tone will produce a time-out after pressed continuously for 15 seconds and will not deliver the command until the button is released. The receiver flashes a green light while working ,time length is synchronized.
Dog search light function level adjustment operation:
On light 1 mode,press the light button on the remote controller and the receiver’s green light flashes for 10 minutes. If press the light button again within 10 minutes, the light will be turned off.
On light 2 mode,press the light button on the remote controller, and the receiver‘s blue & red light will flash for 10 minutes respectively (blue 1s,red 1s). If press the light button within 10 minutes, the light will be turned off.
On light 3 mode, press the light button on the remote controller and the receiver’s purple light flashes for 10 minutes. If press the light button again within 10 minutes, the light will be turned off.
Important Note:
- Press any button to activate the transmitter, the backlight is On
- 2.The backlight will stay for 20 seconds for power-saving, then will be off if without any operation during 20 seconds ,but working mode is still shown on the screen.
- The transmitter will go into sleep mode after 1 minute and does not display any working mode or icons.
Package Contents:
- Handheld Transmitter
- Receiver
- Nylon Collar Strap
- USB Charging Cable
- User Manual
- Test light