Dongguan Xinsu Technology is a Chinese company that manufactures and export robot vacuum cleaner, robot cleaner, etc. It is one of the fastest growing company in domain of robotics in China. R20 robotic vacuum cleaner is an autonomous vacuum cleaner. Its unique, classy and elegant look speaks volume. The intelligent programming of R20 robotic vacuum cleaner allows it to work without human control.
Product Usage/Preparation:
Install dust box accessory:
Press dust box switch and push it in as shown.
Review the bumper protective Strip:
Before using the robot, please remove the protective strip from the robot.
Charging Base:
- Placing and Charging: The charging station is against the wall and placed on a flat ground. Do not place articles within the range of 1.0 m left and right and 1.5m ahead.
2. Connect the power supply.
3. Installing side brush : Install the side brush according to the left and right.
4. Turn on main switch. ‘I’ means turn on robot and ‘O’ means turn off robot.
5. Charge:
There are two ways to charge the robot:
a. Put the robot on charge base to charge.
b. Use power adaptor to charge.
During cleaning process, robot will detect its own power shortage then start return to charge base automatically mode; and look for the charging base for charging automatically. You can command
robot to start the “return to charging” mode through the recharge button of the mobile APP.
Water Tank Use:
- Open the water injection port of the water tank and plug the water injection cap.
2. Install the mop.
3. Install the water tank into the dust bin.
4. Install the dustbin and the water tank on the host.
5. Start the mooping floor.
*Please don’t use water tank on the carpet. If your room is with carpet please use virtual blocker on APP to stop the robot enter carpet.
Start Cleaning:
According to different cleaning needs, the product has a variety of cleaning modes to choose from. You can start various cleaning modes through a host, remote control or app.
Automatic Cleaning:
Applicable scenario: The robot will scan and generate a map and intelliegent partition according to the actual home environment after start up. The cleaning path is planned by means of edge cleaning first and bow-shaped filling and each partition is cleaned one by one in an orderly and efficient, full coverage without omission.
Setting method:
In the shutdown state, turn on power supply after robot broadcast the voice , press the start key, on the robot or touch the
key on app to start the automatic cleaning.
Partial Cleaning:
Applicable Scenario: It is applicable to the ground environment where garbage is concentrated. Press partial cleaning button to start cleaning while robot is on standby or suspended mode. This mode is used to clean the square area with 1.5×1.5 meters as the center of the robot. After the cleaning, the robot will automatically return to the start point then stop cleaning.
Component Maintenance/dust bin & filter:
- Press dustbin release button to take out dustbin.
- Open the dustbin side cover.
- Dumping the rubbish.
- Open the HEPA filter cover.
- Take out HEPA filter, Sponge filter and primary filter, clean it by mop or brush.
- Remove the dust from primary filter and wash, dry it before next time use.
- Clean the dustbin by mop.
- Dry the dustbin and filters, keep it dry to extend its lifespan.
- Replace the primary filter and the HEPA filter into the dustbin.
- Close the dust bin cover and install the dust bin into the host.
Component Maintenance/dust bin & filter:
Water tank is an optional function:
- Take off water tank.
- Take off mop.
- Clear the water.
- Wash the mop.
- Clean water tank.
- Dry the mop.
- Dry the water tank.
Disassembling the battery:
Remove the screw and open the battery battery cover.
The instructions for appliances incorporating batteries that are intended to be replaced by the
user shall include the following:
- the type reference of the battery;
- the orientation of the battery with regard to polarity;
- the method of replacing batteries;
- details regarding safe disposal of used batteries;
- warning against using non-rechargeable batteries;
- how to deal with leaking batteries.
Product Paramter:
- The Host
| Description | Parameter |
| Size | 330*996 |
| Battery | Lithium |
| Weight | 2.6 kg |
| Rated power | 14.8v |
| Rated power | 32W |
2. Charging Base:
| Description | Parameter |
| Size | 155*150*80 |
| Input | 19V |
| Output | 19V 0.6A |
| Rated Power | 11.4 W |
| Rated Frequency | 50/60 Hz |
Package Included:
- Host
- Charging base
- Power adaptor
- Water tank
- Dustbin
- Cleaning brush
- HEPA
- Side brush
- Mop