Thank you for purchasing our products.
This manual describes how to use the S80 Bluetooth headset and precautions. Please read the instructions carefully before using this product. In addition, please keep this manual properly for reading at any time.
If the product you purchased fails, you can contact our after-sales department, we have a comprehensive after-sales service. After-sales E-mail: Sales@GIazata.com
Product Specification:
Product Description:
S80 is a high-definition call Bluetooth headset made for business people. Using Qualcomm 3020 chip, equipped with dual-mic feedback noise reduction technology, through dual MIC array, automatically reduce environmental noise, accurately calculate the caller’s location, present pure sound quality and clearer voice calls such as face-to-face conversation. It supports aptX and aptX-HD and is compatible with AAC/SBC and other formats, decodes more music details, and brings more shocking music enjoyment.
Function Description of each component:
| Power switch | ON means power on;OFF means power off. |
| Multi-function key | Answer/Reject/Call back Jt3ang up/Play/Pause. |
| Adjustment key | Used for volume adjustment or music switching. |
| LED light | Headset status indicator. |
| Ear caps | Used for sound insulation and increased wearing comfort. The spare ear caps are available in three different sizes: L/M/S. |
| Charging port | use a USB Typec charging cable to charge. |
Headphone Charging:
Charge before use.
Please use a charger with an output power of 5V1A or less to charge the headset.
About charging
Charging time: about 1 hours
When charging, the LED indicator lights up red, and the blue light is on after full charge.
Note: Please turn off the Bluetooth headset when charging the headset. The charging time depends on the actual power output of the charger.
- Plug the included charging cable into the headset charging port.
- Connect the other end of the charging cable to a 5V1A charger or to the USB port of the computer.
- When the LED indicator is red, it means charging is in progress; when the LED indicator turns blue, charging is complete.
Pairing Method:
- Turn on the headset (turn the power switch to the ON position).
- S80 Bluetooth headset automatically enters the search and pairing state.
- Turn on the Bluetooth of the mobile phone or other dev
- Click search, when “S80” is found, click pairing, and the wait for the pairing to succeed.
How to connect to a desktop PC:
- Download and install a universal Bluetooth driver.
- After installation, Plug in the Bluetooth adapter.
- When the S80 Bluetooth headset is in the search and pairing state, right-click the computer’s Bluetooth icon interface and select “Search Device”; then it will search for nearby Bluetooth devices and select “S80”, click to complete the connection.
How to connect two devices:
After connecting the first device, turn off the Bluetooth of the first device. The headset re-enters the search pairing state (red and blue lights flashing).
Turn on the Bluetooth of the second device, search for “S80” and click on pairing.
O«After the second device is successfully paired, turn on the Bluetooth of the first device again, and the headset will automatically connect back to the first device.
After one for two connections, the headset will play the sound of the current device by default. When switching devices, you need to turn oP the device that is playing. (When there is an incoming call, the Bluetooth headset will play the device with the incoming call first).
Basic Operation:
Boot:
Turn the power switch to the “ON” position, the indicator light flashes, about 2 seconds later, the red and blue lights flash, and the headset enters the search and pairing state.
Shut down:
Turn the power switch to the “OFF” position, the red indicator light will stay on for one second and then go out, which means it is off.
Start a Call:
- After the headset and mobile phone are paired successfully, you can start a call.
- When a call comes in, short press the multi-function button to answer; press again to hang up the call.
- When a call comes in, press and hold the multi-function button for about 2 seconds and then let go to reject the call. Press the multi-function key twice in succession to redial.
Volume Adjustment:
Short press the volume “+” key to increase the volume; short press the volume “-” key to decrease the volume.
Note: Some devices do not support Bluetooth volume synchronization. You need to adjust the volume of the phone to the maximum first, and then adjust the Bluetooth headset.
Matters Needing Attention:
- Due to differences in mobile phone hardware or software, the screen of some mobile phones will not display the remaining battery power of the Bluetooth headset.
- The standby time of the Bluetooth headset varies with the volume and environment during use.
- The effective distance of the Bluetooth signal is more than 10 M, you can use the Bluetooth headset within 3-5 meters, because too long distance will cause signal weakening/loss/ interference caused by the mobile phone transmitting wireless signals, and you will hear intermittent sounds at this time Or the sound is poor or even disconnected (the headset will try to reconnect after disconnecting and returning to the elective distance).
- If you do not use this product for a long time, please store it in a dry environment, and charge the headset at least once a month to extend its life and avoid extreme temperatures and dust.
Important Safety Precautions:
- Never use corrosive cleaning agents to clean this product.
- Do not let this product be heated or close to a fire source, such as a cooking stove.
- Do not expose this product to direct sunlight for a long time.
- Do not dispose of this product in fire to avoid explosion.
- Do not try to disassemble this product to make any modifications, because it does not contain any maintenance components.
- The waterproof level of this product is life waterproof, please avoid the earphones from being exposed to heavy rain.
Packing List:
- S80 Bluetooth headset*1
- Type c charging cable*1
- Manual*1 Ear caps (L/M/S)*3
- Retractable ear hook*1
Note: To download the complete user manual, please download the following file: