Dear customer,
Thank you for using our product. For better use, please carefully read this instruction. If you have any issues not mentioned here, please contact the provider. All parts of this booklet are reserved by our company, including words, pictures and graphics. Without written permission, no unit or individual shall extract, copy, translate or edit the content in this instruction.
Platform/Software Operating Instruction:
The software carried by the product is LAN (LAN or offline version , provides the secondary development). Please mark the need for software version when place the order.
Appearance description:
Illumination intensity:
The recognized face, of which, the illumination intensity “intensity” in short) shall not be lower than 30 Lux. The device has filing light itself, so when the device put in a totally dark environment, the face illumination intensity, 0.5m distance to the device, is about 100 Lux. The nearer to the device, the higher the intensity is. If there is overexposure on the face, the face characteristics will be unable to be extracted and may lead to hard recognition.
Intensity Test:
The test standard is as shown on the picture:
the angle between dotted line A and dotted line B is 90 ° , the test adopts the common light meter with full spectrum, and applies U30 standard light source, adjust the distance between source light and test object, subject to the illumination intensity of the object face at this time. Illumination intensity in actual scenarios.
Illumination Intensity in actual scenarios:
Light issues may lead to big differences between site image and registered image; backlight, side-light and strong light will influence the recognition experience.
(Analysis: from the view of human eyes, the color changes on face skin may result in wrong recognition of identity; unclear exposure area, no matter large or small, may result the identity judgement).
Improvements:
- Install the device in a place with little impact from light source.
- Add a registered image according to the site condition, and it is suggested to use this product to enroll images.
- Properly lower the threshold value according to usage.
Position:
Sunlight shines door:
Sunlight shines indoor When the sunlight shines indoor through the window, the face recognition terminal device shall not be installed in shown black shadow area, instead, shall be installed in place with little sunlight impact, no side-light and no backlight. (Glass window can be deemed as no walls.
Glass Window:
Glass window If the room has glass wall, there is no shield for sunlight, then it is suggested to hang curtains over the window.
Sunlight shines through the door, with glass window at one side:
Sunlight shines through the door, the device shall be installed at the place with shields and little light impact. Glass window can be deemed as no shields, the device shall be installed at the side without glass window or with curtain hung.
Sunlight shines through the door:
Sunlight shines through the door, the device shall be installed at the place with shields and little light impact.
Steps:
- Paste the installation sticker on the wall, and keep the horizontal line parallel with the ground and the red line 1.4m distance to the ground; drill screw holes on suitable position on the wall according to the installation method (if use 86-box, then no need to drill holes), drill 1~2 outlet holes according to wiring need.
- Move the support to align holes on it with holes on the wall, and use the screws to fix the support.
- Align the interface socket and Ethernet port with device back and insert.
- Thread the tamper screws into the support and rotate 2 turns, then align the bottom slot with the support hook, use the hexagonal wrench to tighten screws following the shown direction. Installation completes.
Installation notes
When arrange the wires, if the 12V power supply cable of the host does not adopt the “Special power strip” and is in long distance, resulting in large resistance, then abnormal phenomena may occur easily such as insufficient voltage (,11V) , repeat start , system crash and so on. Wiring connection of voltage metering is shown as follow.
The power adapter is put together with the device which is optional, such as EU standard, American standard, UK standard, and so on.
Features:
Characteristics
Completely solve image frauds in all kinds of carriers with infrared and RGB dual-camera; when face database is 10-thousand. the recognition accuracy is 99.99% ((99.77% recognition rate under 1% false accept rate; 99.27% recognition rate under 0.1% false accept rate).
Store records in local
Store 10-thousand level database in local
Device supports storing 10 thousand pieces of face images, 30-thousand pieces of recognition records (including on-site photo storage).
Quick recognition speed
Recognition speed less than 1s.
Secondary development (integrated):
Support the interface connection in HTTP; supports 232 serial output, Wiegand 26 and 34 output, custom the configuration of output content.
FAQ:
- Try to restart and reset:
When the device stops in some interface for a long time, users can plug out the can long press RESET hole for 8-12s to restart the device. Besides, users can
- Protection:
This product possesses certain capability of self-protection, as it can prevent small objects (such as tools, wires and so on) from entering and touching internal parts.
- Drop resistance:
Please avoid operations such as falling, breaking, bending, heavily pressing and so on.
- Cleaning:
Please use soft cloth or such materials, lightly wipe the display screen or panel, and to avoid scrubbing with water and cleaner.
Note: To read the complete user manual, please download the following file:
