CDL-3PBRBC Digital Door Lock User Manual COMMAX

Overview
Robust Door Lock Body
KS & KC authentication give guaranted Quality and
insured Product Satisfaction.

Auto Lock/ Re Lock/Double Lock Function
User Friendly Function give Safety and easy usage.

Dummy Number Functions give high level safety.
Dummy Number & Real number combination give high level password.

Multi-level volume control / mute optional Function
User can easily select 7level Volumne Control.

Light Button indicate in the dark space
You can easy to use the device using light keypad buttons.

Emergency Power Function (9V square battery)
Emergency power working even if the batteries run out completely.

Anti high-voltage / anti fireproof / anti-hacking system
It is very safe for using anti high-voltage and anti-hacking system. Also
if the temperature is higher than certain temperature, the door will be
open automatically with warning sounds under the fire.

Safety Cautions

• Don’t install, repair or
  disassemble the device
  randomly.
• This device is suitable
  for home safety level,
  other condition will
  not be guarante quality
• Please read operation
  manual Carefully.
• Don’t push or insert
  the button with drill
  or pin
• Change the pin-number
  regularly for the safety
• Don’t heavy damage
  on door lock
• Do not insert the
  batteries reversely.
  it will be cause some
  burst or leakage from
  batteries .
• Don’t put water into
  the device.
• When change battery,
  please use all
  new alkaline battery.
• When you clean the
  device, please use
  the dry towel
• Do not use any other
  purpose for Door lock.

CONTENTS

Specification
Parts Name
How to use
Easy Function
(option)
Emergency Alarm
Function
Breakdown Cause and Solution
Consumer Protection Rules
Product Warranty
Setting Pin Number
Setting Smart Key
Setting BLE(Smartphone)
Delete setting Smartkey
Delete setting BLE
Open the gate(Keypad)
Lock the gate(Outside)
Open the gate(Inside)
Lock the gate(inside)
Force Lock Status
Autolock Setting
Manual Setting
Sound Pause Function
Volume Control Function
Dual Authentication &Registration on/off
Built in Remocon Setting
Heat Warning
Intruder Alarm
Warning Mischef and 1min stop function
Deadbolt(mortise) Error Alarm
Battery Replacement Warning
Emergency Power
Emergency Key(key type)

Product Standard

Division	Features
Install Condition	Normal Fire Door	Door thickness 40mm ~ 50mm
Access Methods	Pin Number	4~12 digit number combination(Up to 4 pin numbe
Smart key	Up to 30 keys
Smarphone	Option
Remocon	Option
Rated Voltage	DC 6V	LR6 1.5V AA Size Alkaline Battery, 4 psc
Emergency Power	DC 9V	Alkaline battery(Optional)
Product Type	Fireproof type, Temperature sensor type, Key type, Master key door lock(D-NF-T-K-
Temperature Alarm	Temperature Sensor	72 ±5 (Lab Conditions)
62 ±5 (Normal Conditions)
Material	External Enclosure	Al, Zn, ABS
Internal Enclosure	Al, Zn, ABS

RF Standard:

Item	Frequency	Channel	Modulation	Antenna power (field strength)
RFID	13.56Mhz	1ch	ASK	Under 93.5dBuV/m@10m
Wireless Devices	447.275Mhz	1ch	FSK	Under 10mW

Features:

Parts Name

No	Name	Features
	Key Buttons	Register or change the pin number. Open the door with registered pin number.
	Battery Alarm	Open/register the electronic key.
	Smartkey Access Point	Smartkey access point for open gate. By Contracting smartkey open the door or register smart key.
	Outside Handle	handle can open or close the doo.r
	Emergency Power Supply Terminal	When battery fully discharged, contact 9V battery and power on emergency power working.

No	Name	Features
1	Battery Cover	Cover for battery and buttons for registration of pin number & electronic key.
2	Link Pack	Receiver (CDL-447RM, option)
3	Register Button	Use registration or change the pin number or electronic key
4	Mortise	Lock or close the door for installing side of door.
5	Dead Bolts	Lock the door to door frame.
6	Wrench Bolts	Prevent to shake the door.
7	Sub Wrench Bolts	Check for Door open or Close.
8	Alkaline AA Battery	Battery for main power
9	Manual Lock Button	Lock the door under manual mode
10	Inner Handle	Open or close the door from inside.

How to use

Caution: Please set the pin number while you
open the door.

1. Open the inside [battery cover],push
   the[Register]Button and hear “Beep”
   sound shortly.
2. Check outside light on [Keypad]
   push the button NO 1.
3. Set the pin number 4 to 12 digits.
4. Push the [* ] button
   make “Beep” Sound and succeed registration
   One more push the [ *] button
   and completed registration.

Setting Smart Key

• Newly registered smart key or re-registred, please register
  at a same time. other card not possible except provided card.
• Open the battery cover,
  Push the registration button once
  then you can hear “Beep” sound.
• Check outside light on [Keypad]
  push the 2 on the Keypad, direction Dimming
• [Smart key]close up on [smart key input]
  when succeed registration, sound beeping.
• Push the [Register]button,
  it completed Registration

Delete setting Smartkey

Open the inside [Battery cover]
push the[Register] Button
and hear “beep” sound shortly.

Check outside [Keypad] lightning on,
Push the Button, light on [# ]Button

Push the [# ]during 5sec.
it makes ‘Beep”sound and delete
entire smartkey information.

Open the gate (Keypad)

1. Key pad openning
   Touch [Keypad],
   input [Password].
2. Push the [* ]button and belling
   beep sound Door will be released.

Open the gate (Smart Key)

• Smartkey Opening
  BLE(smartphone)Opening (CDL – 3PBR Model type)
  Registered [Smart Key]close to
  [Smart key] access point.
• Beep sound and open the Gate.

How to use

Auto Locking

Pull the inside handle
Closing the door and lock the door
after 2second automatically.

Manual Locking
Touch the [Keypad], door will be lock.

Emergency Alarm Function

1. Heat Warning

When a fire is detected, a high temperature of about suspected (62Ⳅ ± 5Ⳅ), automatically releases the locked state with strong beeps for safety.

2. Heat Warning

Warning mischief and 1 minute stop function. Abnormally in the door is locked (For example: forcely open the gate) occurs when the door open condition is detected. Beep noise makes 80 db (db) beeper.

3. Warning mischief and 1 minute stop function
Abnormally in the door is locked
(For example: forcely open the gate) occurs when
the door open condition is detected
Beep noise makes 80 db (db) beeper.
If input not registered [password] or [Smart Key repeatedly entered
five times l stop operating 1 minutes with alarm.

4. Deadbolt (mortise)error alarm

Opened or locked, when the dead
bolt (square clamp) of the indoor
unit body is normally taken out, or
do not enter “beep, beep beep,
beep” warning sound occurs three
times.

5. Battery Replacement Warning

Battery icon light on the Keypad or make sound “bleek bleek
bleek”, please change battery. all battery change required.

CDL-3PBRBC Digital Door Lock User Manual COMMAX

https://fccid.io/CCECDL-3PBRBC/User-Manual/User-Manual-3371743

Break down cause and solution

Problem	Solution
No Power	Please check battery status bad or gone power and check battery input direction   please change new 4 alkaline Battery.
No Change Password	Please input password short “Beep”sound one by one.   Again password register / repeat input.
No open the door though push the [  ]button	please check passwor input correctly   When input password, keypad light off, it will be not change password , presss the [  ]button and check keypad light on, input password again. (if didnot input password within 7sec, it will be canceled.)
Password / Smart key authentication success but no open the door	Please try 9V emergency power(square type)   Lock can may broken. please contact installer.
keep going alarm “Beleek x3 ” warning sound.	– Beep indicating the battery replaced. if you heard this alarm, please replace all new 4pcs battery.
No enter Auto Locking	Please reset automode.   Sound occurs the batteries discharge and does not work. please change all new battery

Consumer Protection Rules

• COMMAX conducted a guarantee of the product as shown below each item, depending on the consumer compensation regulations.

• Please install the product can not be installed by a professional installer or authorized installer to install receive A / S if faulty.

Emergency Power

If the product fails within the first year after purchase (the warranty period), you get the free service only.

Consumer Damage Type	Compensation
within Warranty	after warranty
Functional defects in normal use occurred in 10 days	Product Exchange
Functional defects in normal use occurred in 1month	Product Exchange
Serviceable	same fail 3times again	Repair free	Repair charge
same file 4times again	Product exchange	Repair charge
No Serviceable	When repair parts for repair but impossible (within the parts holding period))	Product Exchange	Depreciation and exchange
When repair parts are not impossible to repair (parts within the retention period)	Product Exchange	Depreciation and exchange

Paid Service

1. For non-failure	If it is not subject to failure, it will be service charge. Please read the instruction manual.Installation issue on non-malfunction.Force damage on the device for lost password.
2. If the consumer fails to negligence	User Handling of abuse or inappropriate repair, modification and trouble occurs.Non official installer or non professional person installed and make trouble.Drop or make damage by cause of fault or error.
3. etc	If any trouble occurs due to natural disasters (lightning, fire, salt damage, flood, etc.)If the end-life of the consumable parts (batteries, etc.)normal case consumer receive within 15month(including distribution period)

Product Warranty

Product Name
Product Number
Purchase (installed) Date	20       year       month        days
Customer’s Name
Telephone
Address

Installer Company
Telephone
Address
Installer’s Name

Please keep this document for full service must present this warranty.

1. Warranty for this product is the warranty benefits to the contents listed in the warranty.
2. The warranty period is calculated from the date of purchase, so please obtain a base purchase date.

FCC Statement

15.19:

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

15.21:

Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.

15.105(b):

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Disclaimers

The manufacturer, importer, and distributor shall not be liable for damages including accidental and personal injury due to the improper use or operation of this product. The information in this

user manual was written based on current product specifications. The manufacturer, iriver Limited, is adding new complementary features and will continue to apply new technologies in the future. Product specifications may be changed without prior notice.

iriver is not responsible for data loss due to product use.

Exposure statement

The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.