Grandstream HT802 Installation Guide

by

HT802 Analog Telephone AdaptorQuick Installation Guide

Package Contents

Overview

The HT802 is a 2 port analog telephone adapter (ATA) that allows users to create a high-quality and manageable IP telephony solution for residential and office environments. Its ultra-compact size, voice quality, advanced VoIP functionality, security protection and auto provisioning options enable users to take advantage of VoIP on analog phones and enables service providers to offer high quality IP service. The HT802 is an ideal ATA for individual use and for large scale commercial IP voice deployments.

Grandstream HT802 Product Images

HT802 PORTS

Connecting The HT802

The HT802 is designed for easy configuration and easy installation, to connect your HT802, please follow the steps below:

  1. Insert a standard RJ11 telephone cable into the phone port and connect the other end of the telephone cable to a standard touch-tone analog telephone.
  2. Insert the ethernet cable into the internet or LAN port of the HT802 and connect the other end of the ethernet cable to an uplink port (a router or a modem, etc.)
  3. Insert the power adapter into the HT802 and connect it to a wall outlet.
  4. The Power, Ethernet, and Phone LEDs will be solidly lit when the Phone Adapter is ready for use.

Configuring The HT802

The HT802 can be configured either using the embedded Web GUI using PC’s web browser or using the IVR voice prompt menu.

Obtaining The IP Address

The HT802 is by default configured to obtain the IP address from DHCP server where the unit is located. In order to know which IP address is assigned to your HT802, you should access to the “Interactive Voice Response Menu” of your adapter via the connected phone and check its IP address mode. Please refer to the steps below to access the interactive voice response menu:

  1. Use a telephone connected to phone 1 or phone 2 ports of your HT802
  2. Press *** (press the star key three times) to access the IVR menu and wait until you hear “Enter the menu option “.
  3. Press 02 and the current IP address will be announced.

Configure using Web UI

  1. Connect the computer to the same network as your HT802 and make sure the HT802 is booted up.
  2. You may check your HT802 IP address using the IVR on the connected phone.
  3. Open the Web browser on your computer.
  4. Enter the HT802’s IP address in the address bar of the browser.
  5. Enter the administrator’s password to access the Web Configuration Menu. (By default the admin password is admin)

NOTE:

The computer must be connected to the same sub-network as the HT802. This can be easily done by connecting the computer to the same hub or switch as the HT802. You can find more information on the manufacturer website http://www.grandstream.com/support/resources?hsLang=en

PRECAUTIONS

  • Do not attempt to open, disassemble, or modify the device.
  • Do not use a third party power adapter.
  • Do not expose this device to temperatures outside range of -10 °C to +60 °C.
  • Do not expose the HT802 to environments outside of the following humidity range: 10-90% RH (non-condensing).
  • Do NOT power cycle the HT802 during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction

Download PDF User Guide

Grandstream HT802 Installation GuideDownload