Product Images
Specifications
- Product Specification: Bluetooth version: 5.0 RMS: 5.0 W * 1 Impedance:: 4Ω
- Working distance:≥10M
- Frequency response: 90HZ‐‐20KHZ
- Signal‐to‐noise ratio:≥60dB
- Input sensitivity: 600±100m
- Distortion:≤0.3%
- Product Size:W140*D140 * H150 mm
- Charge voltage: DC 5V
- Battery : 600mah/3.7V
- Playing time: 1.5‐3.0 hours
Turning On
- Keep the press slide roller to “ON” to power on the device, to use the following functions:
- Note: Once finished using, Keep the press slide roller to to “OFF to turn off the device.
Pairing Bluetooth
1.When the powered on , speaker makes a prompt voice, When indicator light flashes in blue, speaker is ready to pair with your device.
2.Please check phone searches for pairing name , device to connect. Once paired,the speaker makes a prompt voice.
3.From this moment, you can control the music from your mobile device, or from the receiver.(pls following the How to use the button)
How to Use The Button
1. Double- press the slide roller to switch Bluetooth mode or AUX mode
2.Short press “ II/M»IM” to play or pause
3.Keep press the slide roller and release the control button‐k to left or right to play next/previous song 4.Short press the slide roller and release the control button‐k to left or right to volume + /volume ‐ .
Playing With AUX Cable
Insert the micro USB cable into the micro USB port, and insert the 3.5mm jack into your mp3/mp4 player/mobile phone or othe r compatible device to play the music.
Note: When connecting the cable, the device does not change mode automatically. The press” II/M” to switch to AUX Mode.
How To Charge
Insert the Micro USB connection into the Micro USB port on your device and connect the other end of the cable to your PC or AC/DC adaptor to charge the speaker.
Note: At the end of charging, do not forget to disconnect the cable ,the charging time can not exceed 8 hours.
Microsoft Word – SP-1.0 Bluetooth MANUAL.doc
| Fault | Solution |
| Unable to pair with other device | 1. Check whether the speaker is still in the process of search or switch it off and on again. 2 There are too many Bluetooth devices in the proximity that cause difficulty in connection.Turn off other Bluetooth devices. 3. Make sure your device is in “Pairing Mode” |
| The sound is low or distorted. | 4 Check the Bluetooth device volume and then adjust it to an appropriate level. 5. Recharge the battery. |
| Occasionally the music stops. | 6. Check whether the speaker effective transmission range is exceeded or if there is an obstacle between the speaker and other Bluetooth devices. |
| Does not turn on or the light Does not up | The battery level is low, recharge the device. Switch the speaker off and on again. |
| UO-MSSPK Mushroom Wireless Speaker User Manual SP-1.0 Bluetooth MANUAL COMCN ELECTRONICS LIMITED | |
| Note: Do not dismantle, repair or modify this product by yourself, contact an authorized specialist | |