Waferlock Cylinderical Electronic User Manual

Parts List:

1. Outer Unit Including Lever

2. Inner Unit:

3. Inner Lever:

4. M3 Screw:

5. Keys:

6. Inner Fixing Plate:

7. Fixing Screws X 2:

8. Dismantling Lever/ Door Thickness Adjusting Tool

9. Strike Plate:

10. Latch Set:

11. Battery:

Installation Manual:

1. Install latch set with correct direction.
2. Place the rubber plate correctly on the outer unit.

1. Install outer unit through the cutting hole.
2. Make sure the outer unit connect latch set properly.
3. When no power, please use 9V battery to temporarily power the lock.

1. Match inner fixing plate with rubber plate.
2. Make sure the inner plate at the center of rubber plate.
3. Pull the cables of outer unit through the hole of inner fixing plate nearer the latch set.

1. Install the inner lever handle set and be noticed the below two points.
   • Lever fixed emboss faces the latch set direction.
   • The cables are not overlapped through the hole of inner lever handle set.

2. Tighten fixing screws and make sure the cables comes out from the hole properly without any damages.

Well connect the cables to the connectors of the inner unit.

Install the inner unit and tighten the fixing screw from the bottom.

Tighten the fixing screws at the battery box of the inner unit.

Install the inner lever and make sure the lever is fixed on the lever handle set.

1. Insert batteries and slide the battery cover properly as the photo.
2. Tighten the M3 screw.

Note: To read the complete user manual, please download the following file: