Please Read Before Use
Charge your Qi wireless compatible devices without the use of cables. Simply place your phone on top of the wireless pad and enjoy an easy charge. Our Qi wireless charger will work with any Qi/Wireless enabled devices; simply plug the included Micro-USB cable into the pad and you’re ready to go!
Package Contents
- Wireless Pad x 1
- User Manual x 1
- USB Cable x 1
WIRELESS MINI PAD:
Technical Specification:
| SIZE | 70mm x 70mm*10mm |
| WEIGHT | 30g |
| INPUT | DC 5 V , 1.2 A |
| OUTPUT | DC 5 V/1A , 5W |
| FREQUENCY | 115K-205KHZ |
| TRANSMISSION DISTANCE | ≤8mm |
Using Your Wireless Pad:
Note: All devices must be QI compatible
- Insert one end of USB charging cable into CERTIFIED adapter or computer.
- Insert the other end of the USB cable into the wireless pad.
- A small red LED will light up once the pad has been plugged in
- Place your phone on the centre of the charging pad. When the phone is connected and being charged, the LED indicator will light up Blue to indicate charging has started.
- Just remove the phone from the pad to end charging.
Important Safety Precautions:
- Please avoid dropping, hitting, crushing, throwing, immersing or puncturing the product.
- Do not disassemble the product.
- Keep the products away from fire, flammable items, water, rain, damp places, high voltage devices and corrosive materials. . Ensure product is not covered by anything that could stop the heat from dissipating from the device.
- The maximum ambient temperature during use of the product must not exceed 40°C.
- Please keep the wireless pad away from direct sunlight, extreme heat or cold.
- To clean your pad, unplug the pad and use a dry brush or cloth.
- While charging and after charging, the pad and product may be warm. This is normal.
- Please stop using the wireless pad immediately if it is damaged, emits a smell or becomes abnormally hot.
- Please keep the wireless pad away from children and ensure all persons who use the pad read and follow the correct instruction.
- We do not recommend using the wireless pads with in car chargers.
FAQ:
How do I know if my pad is ready to charge and charging?
The LED indicator of the pad blinks shortly and lights up red when connected to power, charging standby.
When the phone is connected and charging, the LED indicator blinks blue, and will keep light on blue when fully charged. When comes to Foreign Body Detection, the blue light keeps blinking.
What if my wireless pad isn’t charging my phone?
- Double check there is nothing obscuring the connection between your phone and pad.
- Ensure the input voltage is within the recommended allowance.
- Make sure your device is compatible with QI wireless charging.
- Try removing your phones protective case.
How can I double check the voltage information for my wireless pad?
- Refer to the user manual that comes with the product and/or refer to information on the packaging, and product itself.
Where should I use the wireless pad?
- We recommend placing the wireless pad down device and allow for good circulation to prevent overheating.
Note: To read the complete user manual, please download the following file: