Part1: The correct way to wear bone conduction Bluetooth headset
Bone conduction earphones do not need to be inserted into or cover the ears, but the vibration unit (commonly known as: vibrator or speaker) is attached to the temporal bone protrusion in front of the human ear. It will be very comfortable to wear correctly and will not cause any burden on the ear and neck.
Part 2.Component position description of bone conduction headset
- power key and Function keys
- Volume”-“button
- Volume “+”button
- Micro USB port: battery charging port
5: indicator lamp
Part 3. Bone conduction headset components and instructions for using:
power key and Function keys :
(1) Turn on: Press and hold the power key for 2 seconds to turn on the power.
(2) Connect the headset to the mobile phone via Bluetooth: When the headset is turned on, press and hold the power button for 1 second, and the indicator light flashes alternately in red and green. At this time, find the VS-ZT01-XX headset on the mobile phone and confirm the pairing. When the headset is heard, the headset connection is completed . Connect the headset to the mobile phone and you can use it normally.
3. When the headset is connected to Bluetooth to play music, press the power key to drive the music to pause or replay.
4. The earphone is connected to Bluetooth. If there is an incoming call when the music is playing, you can press the power button to answer the call or hang up.
5. Power off: In the power on state, press and hold the power switch for 4 seconds, the headset will turn off and the indicator light will go out.
Volume”-“button:
When answering a call or playing music, press the “-” key, the sound heard by the ear becomes smaller, and the user can choose the appropriate volume to meet his comfort requirements.
Volume ‘+’ button:
When answering a call or playing music, press the “+” key, the sound heard by the ear becomes smaller, and the user can choose the appropriate volume to meet his comfort requirements.
Micro USB Port: battery charging port
- The headset has a built-in battery charging input port. When the battery voltage is too low, the headset will emit beeps at regular intervals. At this time, you should use the dedicated charger and dedicated charging cable equipped by our company to charge the headset in time, and it will be fully charged in about 2:00 hours.
- When the battery is fully charged, it can work continuously for about 10 hours at half volume.
- When charging, please use our special charger, and disable non-our chargers to charge the headset to prevent damage to the headset.
- Charger parameters: I/P:100-240V O/P:5VDC 2A
- The normal working voltage of the earphone is 3-4.2VDC, and the working current is about 20mA.
Indicator lamp :
- When the headset is turned on, the indicator light will flash green in regular intervals (about 5 seconds)
- Charging in the off state, the red light flashes when charging. The light goes out when full.
- When Bluetooth is searching, the indicator light flashes red and green
alternately.
Basic product parameters:
- Battery specifications: Built-in rechargeable battery capacity 3.7V 260mAh
- Adapter : FX2U-050200U Input:100-240V AC 50/60Hz, Output:DC 5.0V 2.0A
- Bluetooth version:V5.0
- Bluetooth transmission distance:10m Min
Part 4.Conforming to standard:
FCC ID: 2AYRR-VST01
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
To download the user manual, kindly click the following link: