Thank you for purchasing our product. In order to use this product safely, please read the manual before using it. Please keep it properly after reading for further checking and reference.
Tips: If the function of the product described in the instructions has been upgraded, no further notice will be given.
Accessories list:
- 1 x remote control unit
- 1 x collar tie
- 1 x pet collar unit
- 1 x USB charging cable
- Three pairs of metal contacts of collar unit (long and short, one pair has been installed on the collar unit)
In the multi collar set, there are multiple collar control units.
Remote control:
| Position | Name | Description |
| 1 | Signal | Indicates the signal strength of the collar unit, the currently selected channel is hidden when the collar is not paired, when it’s paired but off-line it will flash. |
| 2 | Lock | When locked, it will be displayed and hidden after unlocking. When it’s unlocked,press the [vibration] or [static] button, the operation will be prohibited, and the lock icon will flash. |
| 3 | Wear indication | If the collar is not worn properly, the icon will flash. |
| 4 | Collar power | Battery level indication of the collar. |
| 5 | Dynamic level | Indicates the output intensity of sound, vibration and static action. |
| 6 | Set level | Indicates the set sound, vibration, static action intensity, and the set number will flash when the output intensity is selected |
| 7 | Sound indication | The sound symbol indicates that the vibration and static action will be accompanied by sound, and no display means that there is no sound accompanying with vibration and static electricity action. When the [sound] button is pressed alone, it will flash. |
| 8 | Remote control power | The battery power display of remote control,it will flash when charging. |
| 9 | Channel number | Collar unit channel number, range 1- 9, flashes when channel is selected. |
| 10 | Vibration indication | When the [vibration] button and the [unlock] button are pressed at the same time, it will flash |
| 11 | Electrostatic indication | When the [electrostatic] button and the [unlock] button are pressed at the same time, it will flash |
Collar unit views
1. Electrostatic generation metal contact
2. USB type-C charging interface and silicone cover
3. Working and charging LED indicator light
4. Switch on / off button
LED status light:
| Collar status | LED indicator light displays |
| Power off | LED light off |
| Power on | Three LED lights indicate the battery power. They are on every 15 seconds when the |
| arcade is on. When the switch button is pressed or when the remote control indication is received, it will be on | |
| Pair | Three LED lights cycles flash alternately |
| Charging | The flashing indicates the charging progress of the battery, and all three LED lights are on when the battery is fully charged |
| Low power | Three LED lights flash quickly at the same time, and then turn off, and the device automatically turns off at the same time |
How to train
The training system can cooperate with the password to form a conditioned response to the pet. When the sound, vibration ,static buttons of the remote control are pressed, the signal will be sent to the collar unit, and the collar unit will perform corresponding actions.
The setting of action level can control the collar unit to output different intensity of sound, vibration and static electricity signals. In training, you can choose different action mode and intensity.
In training, start with a low intensity. If the pet reacts to the choice of intensity , the intensity selection is appropriate. If there is no response, the intensity setting can be gradually increased to avoid using too high intensity in the beginning to cause too strong stimulation to the pet.
The training system is equipped with long and short metal contacts. When the dog’s hair is too thick, it is necessary to replace the longer metal contacts. Select the appropriate length of metal contacts for pets to ensure the contact. On the the remote control screen, you can check the display of the [wearing instructions] icon to confirm whether the metal contacts are effectively contacted.
When using, it is necessary to adjust the appropriate length of the neck collar. If it is too loose, the metal contact will not be able to contact effectively, and if it is too tight, it may cause irritation to the pet skin.
In order to avoid possible skin damage, the device is designed to take up to 15 seconds each time when a button is pressed. Do not allow the collar to be worn by the pet for more than 12 hours. Check the neck area after usage, if rashes or pain occurs, stop using it until the skin is completely healed. If the condition persists, consult your veterinarian.
Charge the device:
Use the attached USB in the accessory to connect one end of type-C to the remote control or neck loop unit, and the other end to the USB charger, the device can be charged. When the device is charging, all training functions will be automatically disabled, and there will be no action when the button is pressed.
Wearing the collar unit on a dog
- Make sure the collar unit is powered off.
- Let your dog stand in a balanced position on a flat ground.
- Put the collar strap around the dog’s neck, put the pet collar under its neck, and the indicator light is facing you.
- Put the end of the webbing through the buckle.
- Tighten the end of the collar until the desired tightness is achieved and pass the push rod through the nearest webbing hole.
- Check to make sure the collar is in the middle of your dog’s neck.
- Check to make sure that the metal points of the collar unit are in good contact with the dog’s skin.
- If the neck strap is too long, cut off the excess end and heat the end of the ribbon with a lighter or candle and seal it.
Device parameters:
| Wireless frequency | 433.45Mhz – 433.85Mhz |
| Operation Frequency | 433.59Mhz |
| modulation | FSK |
| working temperature | 14℉~113℉, -10℃ ~ 45℃ |
| Power supply of remote control unit | 3.7V 500mAh Li-Poly battery |
| Remote control unit charging | USB Type-C port，DC 5V 500mA |
| Remote control unit protection | IP53 |
| Collar unit power supply | 3.7V 800mAh Li-Poly battery |
| Collar unit charging | USB Type-C port，DC 5V 500mA |
| Collar unit protection | IP65 |
To download the user manual, kindly download the following link: