Below is the user guide for Minuswires new MW-1100 Pro noise cancelling wireless earbuds.
Operation Quick Start Guide
| Function | Operation | Voice Prompt from earbuds |
| Answer Phone Call | Press the touch sensor area on either of the earbuds 1 times | none |
| Hang up Phone Call | Press the touch sensor area on either of the earbuds 2 times | none |
| Reject Incoming Call | Long press the touch sensor area on either of the earbuds for 2 seconds | Call Rejected |
| Previous Track (Not available when use in single earbud mode) | Press the touch sensor area on the left earbud 2 times | none |
| Next Track (Not available when use in single earbud mode) | Press the touch sensor area on the right earbud 2 times | none |
| Play / Pause | Press the touch sensor area on either of the earbuds once | none |
| ANC mode / Ambient mode (Not available when use in single earbud mode) | Long Press the touch sensor area for 2 seconds, (left / right earphone) to toggle between ANC on, Ambient Sound, and ANC off | ANC ON > Ambient Sound > ANC Off |
| Activate Siri / Google Assistant | When the earbuds are paired with your device successfully, press 3 times the touch sensor area (left / right earphone) | none |
Package Contains
- Active Noise-Cancelling True Wireless Stereo Earbuds (MW-1100ProX)
- 6 x Ear Tips (two are equipped on the earbuds)
- 1 x USB Charging Cable
- 1 x User Manual
- 1 x Quick Start Guide
Product Details
- Charging Contacts USB-C
- Charging Port
- Charging Slot
- Charging Indicators
- Touch Sensor area
- LED Indicator
- Charging Case
- Microphone
Choose the Right Tips
Ear tips come in different sizes are included in the Minuswire MW-1100 Pro package, try all sizes and choose the ones fitting you best.
To properly wear your Minuswire MW-1100 Pro earbuds, insert them as shown below.
Bluetooth Caution: When the device is connected wirelessly to another device, place the two devices close to each other to achieve their normal functionalities and avoid possible signal interference. When using a wireless connection, make sure there are no obstacles between the two devices. Obstacles including walls and fences may shorten the effective range.
Charging the Earbuds: Put the earbuds into the charging case as per the L (left) and R (right) marks, as shown below.
Charging the Charging Case
1. Connect the charging port with any USB charging adapter or active computer USB port.
2. The four step charging bar will light up progressively.Note: Unplug the charging cable (timely) when fully charged.
Power On: Uncover the lid, the earbuds will power on automatically. The LED indicators on both earbuds will light up red and then blue.
Power Off: Put the earbuds into the charging case and cover the lid. The earbuds will turn off automatically.
Pairing Earbuds
1. Uncover the lid and the earbuds will turn on automatically. They will connect with each other. Once connected, The LED indicator on Right earbud will flash blue and red alternatively. The LED indicator on Left earbud will flash blue intermittently indicating the earbuds are in pairing mode now.
2. Turn on the Bluetooth function on your device and search for nearby devices. Find “MW-1100ProX” in the searching results, tap on the name to connect.
3. Once connected, the LED indicators on both earbuds be turned blue intermittently.
4. Take out both earbuds from the charging case. The LED indicators on both earbuds be turned off.
If the earbuds failed to pair with each other, please disconnect the Bluetooth connection with your device, put them back into the charging case, close the lid then open it and take out the earbuds to pair again.• It is not recommended to wear the two earbuds on different people. If needed, please keep the 2 earbuds within 3 meters / 9.8 feet in couple earbuds mode.
