VenirCool Q1 True Wireless Stereo Earbuds contains state of the art acoustic components that make amazing sound quality with deep bass and clear treble.
- Product Structure:
2. Connectable Equipment:
3. Instructions:
Step 1:
Open the lid and enter pairing mode
Open the upper cover, the earbuds will be turned on automatically and ready for pairing.
Step 2:
Device connection:
Enter Bluetooth setting at your device and search for VenirCool Q1 and then click to connect.
You will hear voice prompt “Bluetooth is connected”. Pairing is finished.
Step 3:
Continuously touch 4 times to activate Siri
Tap twice to answer when a call comes in. Tap twice to end the call.
Keep pressing for one second to reject the call.
Step 4:
Play Control:
In play mode, tap twice to pause or play music.
Keep pressing the right earbud to increase the volume. Keep pressing the left earbud to decrease the volume. Tap the right earbud 3 times to play the next song. Tap the left earbud 3 times to play the previous song.
Step 5:
Switch between music mode and game mode:
The default connection is music mode. Keep pressing the touch key to switch (when music playing is paused)
into a low-latency game mode.
You will hear voice prompt “Game Mode”. Keep pressing the touch key again (when music playing is paused) to switch to “music mode”.
You will hear Voice prompt “Music mode.
Step 6:
Charge the Earbuds:
Put earbuds into the charging box and close the cover, the Power Indicators will flash twice, and the earbuds will be automatically charged.
Step 7:
Charge for the charging box:
5V power input, the power indicator shows current power state in percentage, and it shows 99 when full charged.
Touch key function instructions
Touch key: Touch key position is shown in the picture. LED : Red light, ice blue light.
Turnon : 1. The earbuds will turn on automatically
when the charging box is opened.
Shutdown : 1. The earbuds automatically shuts down
when the charging box is closed
- After turning on or disconnecting the connection, if there is no operation for more than 5 minutes, it will automatically turn off.
Activate voice assistant:
Continuously touch 4 times to activate.
Clear mobile phone pairing records:
Quickly touch 3 times (when earbuds without any connection).
Pause music:
In the music playing state, touch twice to pause the music.
Play music: When the music is paused, touch twice to continue playing music.
Decrease volume: keep pressing left earbuds touch key, the volume will be gradually decreased (in playing music status).
Increase volume: Keep pressing right earbuds touch key, the volume will be gradually increased (in playing music status).
Next song: Quickly triple-click right earbud to play next song. Previous song: Quickly triple-click left earbud to play previous song.
Specifications:
Headphone type: TWS Earbuds(stereo call/music) Bluetooth version : V5.0 EDR BLE
Receiving sensitivity (TYP): K/4DQPSK-93db,
8DPSK-86DB
RF power level : Class2
Audio signal-to-noise ratio : S/N^94dB
EQ : Built-in 10-terminal EQ adjustment
Flash memory: Built-in 16Mbytes Flash memory Support decoding : SBC AAC
Transmission distance: §15 meters
Charging interface : TYPE-C Working voltage: 3.7V
Charging current: box 320mAh, earbud 30mAh Charging time : boxd. 2 hour, earbud§1 hour
Battery capacity: charging box 320mAh, earbud 30mAh*2 Battery cycle life : charge and discharge cycle 500 times Talk time : 4-5 hours
Music playback time : 5-6hours
Type : MEMS silicon microphone
Sound way: forward tone
Microphone : double microphone (left / right) Sensitivity: -42dB±3dB (0dB=1V/Pa @1 KHz) Signal to noise ratio (SNR): 57dB Impedance : 1 KHz 300 Q
Type : Dynamic Composite Film Micro Speaker Drive : 13mm :
Sensitivity SPL : 120dB(±3dB)0.179V, 1cm, at, 1KHz Impedance: 30Q
Resonance frequency: 200Hz ±15% Long-term rated power: 5mW short Maximum power: 10mW