Wimius W2 Projector User Manual

by

Structural Diagram

Structural Diagram
Projector Shape

Projector Specifications

Model No.: W2
Display TechnologyLCDLight SourceLED
ResolutionNative 1280×720FocusManual
Installation TypeFront/Rear/CeilingAspect Ratio4:3/16:9/Auto/ Zoom1/Zoom 2
Product Size222*172*90mmProduct Weight1kg
Input InterfaceHDMI/USB/AVOutput InterfaceAudio out

MuItimedia Supported Files

FilesSupport
Audio FormatAAC/MP2/MP3/PCM/FLAC/WMA
Video FormatAVI/.MP4/.MKV/.FLV/.MOV/.3GP/.MPEG1/.MPEG2/H.264/.XVID
Image Format.jpg / .png / .bmp/. peg

If you play the above files, it still can’t work properly, don’t hesitate to contact us via support@wimius.com

Product Overview:

Product overview
Product overview
  1. 3.5mm Headphone Jack(Used to connect your external speaker)
  2. AV Jack/Video input terminal: Press the S button on the main body and the Source button on the remote control, select the AV function on the pop-up screen, and use the 3.5mm device to input video and sound.
  3. Micro SD card slot: Select the multimedia function on the home screen. It can support up to 64GB Micro SD card.
  4. HDMI Jack
  5. USB interface: Insert a USB memory, select the multimedia function on the homepage screen. It can support hard drives up to 1TB.
  6. VGA Jack
  7. Exhaust port: Do not block the suction port and exhaust port of the machine. If the suction port and exhaust port are blocked, it is easy to malfunction.
Projector Input

Remote Control:

Remote Control

Note:

  1. Install 2 pieces of AAA batteries into the remote before using it, Do not combine new batteries with old ones in remote controller, which can cause operation failure due to insufficient power supply.
  2. When using the remote control, please make sure that the signal transmitter of the remote controller aims at infrared signal receiver of the.
  3. When you are not using there mote controller for an extended period. Please take out batteries to prevent batteries leakage.

Installation:

Installation Method:

The projector can be hanged on the ceiling with special hanger fame. and placed on the stable desk to project the image according to the operating environment and requirements. In addition, the projector can be installed with following methods.

Note: Keep the projector at a height where its lens is axial symmetry to the screen. If it is not possible, use the keystone correction ring to adjust the image.

Projector position

Projector Back

Projection Size Chart

IF you want to get a projector screen, please contact us at email support@wimius.com.

Aspect ratio16:9
Distance (m)Picture size (inch)
1.5550″
2.1770”
3.00100”
3.72120″
5.50200”

Power On/Power Off

  1. First connect the power cord to the projector, then connect the power cord to the outlet before the power is turned on.
  2. Once the projector is plugged in, it will be in Standby mode.
  3. If not use for a long time or encounter thunder and lightning, please unplug the power cord.

Power on: Press the power button on the remote control once to turn the projector on. Power off: Press the power button on the remote control again to turn the projector off.

Projector Setting

Select Projection Mode to obtain a front and upward image: HOME > Setup » Projection(10).

Press arrow key to select and press “OK” to confirm.

  1. Front Desktop
  2. Rear Desktop
  3. Front Ceiling
  4. Rear Ceiling
Settings Page
  • Signal Source & Multimedia & Zoom

A. When connect with USB reader: click “Movie” to play video format files, click “Music” to play audio format files, click “Photo” to play picture format files, click “TEXT” to play txt format files. (This projector can’t play PPT by USB reader).

B. Digital Zoom: (Zoom to 75% by step)

Easy to Reduce the Display Size: Default menu interface – Setting – Picture Menu

– Reduce Display Size – Adjust the display size by your needs.

NOTE: The default interface size will not be changed when using the “Zoom function”, you can find the change when “Screen Mirroring”.

Wireless Connection:

Warning Tips:

  1. The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of 100Mbit or more is recommended when using screen mirroring.
  2. Make sure your mobile device is close to the projector when using wireless connection. A distance within 1 meter is recommended.
  3. Some mobile devices may not support screen mirroring due to the compatibility.
  4. Any questions, please feel free to contact WiMiUS support@wimius.com.

Wireless Mirroring Projection:

Synchronize your mobile devices to the projector. ( iPhone/ Android phone/ iPad/ Android Tablets)

Bluetooth Function:

Tips: W2 projector can connect with Bluetooth headsets, Bluetooth speakers and Airpods, But not Bluetooth keyboards or Bluetooth phones.

Bluetooth functions

     

How to Connect Bluetooth Devices

  1. In the”Sound Set” menu and switch the”Sound Mode”to Bluetooth.
  2. The projector will automatically tar searching for available Bluetooth devices. 3.When the desired Bluetooth device name appears in the search list select it and press button “OK” to connect.

Any questions please fell free to contact WiMiUS via support@wimius.com.

Tips:

  1. The Bluetooth function has distance requirement, please keep the distance by 8ft.
  2. The Bluetooth function can only connect one Bluetooth speaker during the use.
  3. If you cannot find the Bluetooth device, please re-start your Bluetooth device and re-search again. Or you can contact our official e-mail for support.

Main Menu Function:

Main menu functions

Contact US                                                                          

Thank you for your purchase with WiMiUS W2 mini video projector.

If any questions during using it, feel free to contact us at below, so that we can service you further.

@ support@wimius.com (optimal)        @http://www.wimius.com/support.html

To obtain accessories or gifts please send Email with your order number to: support@wimius.com