Contents
Package contents
Product overview
Front View………………………………………………………………………………………………………….. 5
Back View…………………………………………………………………………………………………………… 6
Safety notices……………………………………………………………………………………………………. 8
Getting started
Determining door status…………………………………………………………………………………. 9
Preparing your door ………………………………………………………………………………………… 10
Installing your ASUS DL101 ……………………………………………………………………………. 13
Connecting to your HG 100……………………………………………………………………………. 19
Unlocking the ASUS DL101…………………………………………………………………………….. 19
Locking the ASUS DL101 ………………………………………………………………………………… 21
Programming the ASUS DL101 ……………………………………………………………………… 22
Resetting to factory settings………………………………………………………………………….. 26
Tips and FAQs
Drilling template (70 mm lockbolt)
Drilling template (60 mm lockbolt)

Package contents

NOTE:
• If any of the following items is damaged or
missing, contact your retailer.
• The illustrated items below are for reference
only.
• Specifications subject to change without notice

Product overview
Front View

LED information

The LED status indicator helps identify the current status of your ASUS DL101. Refer to the following table for details:

Color	Status	Description
Solid Blue	Battery inserted	LED lights up for 2 seconds
Disconnected with gateway	Press Join button for 5 seconds to reset (LED lights up for 5 seconds)
Identifying device	Use companion app to identify which device is connected to the gateway
Blinking Blue	Connected with gateway	Press Join button for 1 second (LED blinks for 5 seconds)
Blinking Red	Low battery warning	Blinks for 5 seconds after unlocking

Safety notices

• Replace all batteries immediately when the low-battery warning sounds.
• DO NOT mix old batteries with new batteries.
• DO NOT mix batteries from different brands.
• DO NOT mix alkaline and carbon-zinc batteries.
• Insert the batteries according to the correct polarity.
• DO NOT attempt to repair the product yourself.
• Change your codes regularly.
• Minimize the exposure to moisture including wet hands and direct contact with liquids.
• Use soft, dry cloth to clean and avoid cleaning with water, alcohol or other chemicals.
• DO NOT exert excessive force or use sharp objects on the touchscreen panel.

Getting started

Determining door status

Take note of which direction your door will be opened before installing your ASUS DL101, the orientation will be different for left-handed doors and right-handed doors.

Setting lock direction

Enter master password (default: 0000) then press <OK>

Press <0> then press <OK>

NOTE: Set the lock direction after your ASUS DL101 is installed. When the ASUS DL101 is unlocked, touch the panel, then press to enter programming mode.

Preparing your door

1. Adjust the lockbolt
   length to fit your
   door by rotating it
   clockwise or anticlockwise.
2. Attach the drilling
   template to the door
   and mark it with a
   pen.
3. Drill the cross bore
   hole and bore hole
   as indicated on the
   template
4. Insert the deadbolt
   into the door and
   mark the face plate.
5. Chisel out a 4 mm
   recess for the face
   plate along the
   marked lines.

5. Insert the deadbolt
   again and close the
   door, then mark the
   door frame with the
   lock bolt and the face
   plate.
6. Chisel out a 2 mm
   recess for the strike
   plate along the
   marked lines, then drill
   a hole deep enough
   for the locking bolt (at
   least 2.5 mm).

NOTE: The installation steps shown in this manual is for a left-handed door and for reference only.

Installing your ASUS DL101

NOTE: The installation steps shown in this manual is
for a left-handed door and for reference only

Insert the strike plate
into the door frame,
then secure it with the
bundled short screws.

2. Insert the deadbolt
   into the door, then
   secure it with the
   bundled short screws.
   
3. Align the blade and insert it into the cross shaped
   opening on the deadbolt, then pass the cable through
   the opening on top of the deadbolt.

4. Align the mounting plate and install it, then secure the
mounting plate with the bundled long screws.
NOTE: Ensure to pass the blade through the blade
opening, and pass the cable through the cable
opening.

5. Locate the opening labeled OPEN on the cover, then
   insert your key into the opening and tilt it downwards
   to release the cover.
   OPEN
   
6. Connect the cable of the exterior unit to the interior
   unit, then align the interior unit and install it.
   NOTE:
   • Ensure to connect the cable in the correct
   orientation (black to black and red to red).
   • Ensure that the thumb turn lever is in the open
   position.
   
7. Secure the interior unit with the bundled medium
   screws, then install four 1.5V AA batteries and the cover.
   NOTE: Ensure the batteries are installed in the
   correct polarity.

Connecting to your ASUS Smart Home

1. Remove the cover on your interior unit.
2. Launch the ASUS Smart Home companion app.
3. Navigate to the Add Device page and tap Add Device.
4. Locate the Join button on your device.
5. Short press the Join button and follow the onscreen
   instructions.
   NOTE: Ensure that your device is within 50 meters
   of your HG 100, and there are no obstructions such
   as thick solid walls or other electronic devices that
   may cause interference.

Unlocking the ASUS DL101

You can unlock the ASUS DL101 with a user password, one
time password (OTP), user card, key, or the companion app.
When an incorrect password has been entered for five times,
the alarm in the ASUS DL101 will go off, the touchscreen
panel will be locked for two (2) minutes, and a warning
message will be sent to all the family members connected to
the HG 100.
The DL101 comes with an anti-lock picking mechanism,
when the micro sensors on either side of the cylinder is
pressed for 10 seconds, the alarm in the ASUS DL101 will go
off for thirty (30) seconds. Use an user password, user card, or
the companion app to disable the alarm.
NOTE: Refer to Setting up passwords section for
more details on setting a password.

Programming the ASUS DL101

The ASUS DL101 can register one (1) master password and nine (9) passwords (user password, one time password (OTP), and user card). You can also configure the settings of the DL101 to suit your needs. NOTE: When the ASUS DL101 is unlocked, touch the panel, then press to enter programming mode.

Locking with the companion app:

Launch the ASUS Smart Home companion app

Navigate to the ASUS DL101 device

Move the slider to lock

Unlocking with a password

Touch the panel

Press the illuminated numbers (two to four numbers)

Enter user password

Press

Unlocking with the companion app

Launch the ASUS Smart Home companion app

Navigate to the ASUS DL101 device

Move the slider to unlock

Deleting an user card

Enter master password (default: 0000) then press <OK>

Press <3> then press <OK>

Enter card slot number you want to delete then press <OK>

Setting an one time password (OTP)

Enter master password (default: 0000) then press <OK>

Press <5> then press <OK>

Enter OTP password (four to ten digits) then press <OK>

Setting an emergency password

Enter master password (default: 0000) then press <OK>

Press <6> then press <OK>

Enter emergency password (four to ten digits) then press <OK>

NOTE:

• You can only have one emergency password at a time.
• The emergency password cannot be the same as the user password or the one time password.
• The emergency password can be used repeatedly, you can change the emergency password if needed.

Resetting to factory settings

1. Locate the Reset button on your device.
2. Press and hold the Reset button for at least five (5) seconds until the blue LED lights up.
3. Wait till the blue LED goes out to complete the reset.

DL101 Smart Door Lock User Manual

https://fccid.io/MSQ-DL101/User-Manual/DL101-UserMan-20151020-2788713.pdf

Troubleshooting

1.         After installing and inserting batteries for the first time, pressing <OK> does not lock the door. (short beep)

Problem:   The lock direction is not set up yet.

Resolution: Ensure to set the lock direction first after your ASUS DL101 is installed.

2.         After installing and inserting batteries for the first time, there is no response when I press any key. (no beep and no panel light)

Problem:   The batteries are faulty or the cable is not in the correct orientation.

Resolution: Ensure the batteries are inserted in the correct polarity and the cable is in the correct orientation.

3.         I cannot set the lock direction.

(motor turns, door cannot open, long beep)

Problem:   The lock direction in the memory is incorrect or different from the door (such as installing the lock to a new door).

Resolution: Locate the Reset button and perform a factory reset.

4. I can set the lock direction, but door would not lock. (red LED light blinks, three long beeps, motor turns slowly, lockbolt stuck, thumbturn lever jammed)

Problem:   The batteries are low. Resolution: Replace the batteries.

5. I can lock the door, but I cannot unlock the door when I enter my password.

(long beep)

Problem:   The micro mechanisms are faulty.

Resolution: Unlock the door with your keys and contact your retailer.

6. When the door is closed, pressing  locks the door, but a long beep goes off. When the door is open, pressing  locks the door, and no beep goes off.

Problem:   • The hole for the locking bolt is not deep enough.

• The lockbolt is misaligned with the strike plate.

Resolution: • Drill the hole deep enough for the locking bolt (at least 2.5 mm).

• Adjust the strike plate position.

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/ TV technician for help.

CAUTION! Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF exposure warning

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Canada, Industry Canada (IC) Notices

This device complies with Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.