H31B Smart Lock User Manual

Special Attention:

  1. Mechanical keys please keep outdoor, just in case keys lock in doors.
  2. Please replace for the battery when low wattage alarm.
  3. Reading this manual carefully before installation, and keep it for future reference.

Introduction
Lock structure

H31B Smart Lock User Manual

  1. Packing List

 Check the following drawing to check whether the package contains all the parts

NONameQty NONameQty
1Front Pane19Sliding Screws:16*5mm2
2Back Panel110Mortise Screws:10*5 (For Aluminum Door)4
3Mortise:55*72111Mortise Screws:25*4mm (For Wooden Door)4
4Card312M5*20mm Screw for Door Thickness 35-50mm1
5Mechanical Key213M5*30mm Screw for Door Thickness 30-65mm1
6Waterproof Rubber Plate214M5*50mm Screw for Door Thickness 50-65mm1
7Screw Stubs:M5*30mm215User Manual1
8Strike&Strike Box1+116Chuck1

1.1.  Specifications

Suitable for Models  H31Doors ApplicableAluminum door Wooden door
  MaterialsHandle:Zinc Alloy Panel:SS304Working Voltage  6V/4x AA Batteries
  Lock Weight  3KGDoor Thickness to Fit  35-65mm
      Unlocking WayBluetooth Fingerprint(option) Password Card Mechanical key        Data Capacity    Fingerprint:200 Password:150 Card:200
 Gateway(option)  
  ColorSilver BlackWorking Temperature  -10℃-55℃
  Low Wattage Alarm    Less than 4.8V  Working Humidity    0-95%

Initialization:

Long press the reset button on the back of the front panel for about 3s,input “000#”,the initialization is successful when the buzzer short beep twice.

H31B Smart Lock User Manual

Electronic Locking Button

Press the electronic lock button, it prompts “lock” and
the door lock has been locked. At this time, you can
only pass the administrator’s verification to unlock or
press it again, and it prompts that the “unlock” electronic anti-lock function is closed.

Installation
2.1Turn the handle

Notice: Adjust the handle according to the direction you open the door. For Front Panel:

H31B Smart Lock User Manual

For Back Panel:

H31B Smart Lock User Manual

2.2. Installation Diagram(For 5572)

Step 1  Install Mortise

H31B Smart Lock User Manual

Step 2  Install Sliding Screw Casing

H31B Smart Lock User Manual

Step 3    Connect Front and BackPanels

Step4  Install Back Panel

H31B Smart Lock User Manual

Step5  Install the Battery

H31B Smart Lock User Manual

Operation

The software (iOS version) can be downloaded from the app store, and the Android version can be downloaded from the application store of Google play, Yingyongbao, Baidu, Ali, 360, Huawei, and Xiaomi.

Connect lock to the phone

  1. please scan the   QR code to download the app
  2. You can also search for TTLock in the APP store(Google Play)to download
  3. Register a new account (phone number or email) or login with an existing account.
  4. Touch the lock screen to light, click “+ Add Lock”
  5. The lock nearby will appear on the phone screen, Click “+”
  6. Re-name the lock
  7. The lock added successfully

TTlock users can register the account by mobile phone and Email which currently support 200 countries and regions on the world. The verification code will be sent to user’s mobile phone or email, and the registration will be successful after the verification.

H31B Smart Lock User Manual

1.1.  User Management

  1. Bluetooth management

Make sure there is no problem with Bluetooth communication. After connecting the phone to the door lock as above, Click ” lock “to unlock.(the phone is within 5meters from the door lock)

1.1.2.   Setting Passcode

Passcodes are also a way to unlock. After entering the passcode on the locked keyboard, press the unlock button in the lower right corner to unlock. Passcodes are divided into permanent, time-limited, single, clear, cycle, and custom.(You can share the Passcode to other user via WeChat、SMS、Email、Messenger、WhatsApp)

1.1.3.   Send e-Key

Click on the ” Send ekey  ” as shown in figure, you can send the eKey to other users of TTlock to authorize the unlock(the receiver must be download the APP and set up an account)→ Select e-key format (Timed, permanent, One-time, Recurring) → Enter recipient’s account of TTlock,set the name and effective time of the eKey, Can choose to allow remote unlocking or disallowing, authorized administrator or not authorized, as shown in figure →Send→The recipient’s account has Bluetooth unlock permission.

H31B Smart Lock User Manual

Add card


Supports opening doors through various IC cards. Before an IC card is used to
open the door, it needs to be added first. The adding process needs to be perform
ed by the app beside the lock.The validity period of the IC can be set, it can be per
manent, or it can be limited in time.

Add fingerprint


The premise that a fingerprint can be used to open a door is that it needs to be
added first. The adding process needs to be performed by the APP beside the lock. The fingerprint expiration data can be set, it can be permanent, or it can be limited. After setting ,you can modify its validity period.

e-Key management


Click “ekeys “ The manager can delete ekey, reset ekey, send and adjust the
ekey, meanwhile he can search the lock record. 3.4.7.

Passcode management


All generated passwords can be viewed and managed in the
password management module. This includes a password change, password
deletion, password reset, and password unlock record.

Gateway management(Optional)


The TT lock is directly connected via Bluetooth, that is why it is not attacked by
the network. The gateway is a bridge between smart locks and home WIFI
networks. Through the gateway, the user can remotely view and calibrate the lock
clock, read the unlock record. Meanwhile, it can remotely delete and modify the
password.

Manual

After a short period of time, you can see which locks are in their coverage in the app. Once the lock is bound to the gateway, the lock can be managed through the gateway.

H31B Smart Lock User Manual

https://fccid.io/2AY4Q-H31B/User-Manual/User-manual-5154087.pdf

FAQ:

1) How to read operation records?In the Records of the main interface. .
2) Why can’t I unlock it after open the passage modeYou need to perform an unlock verification in any method, than the passage mode will take effect.
3) What is the purpose of Auto LockYou can set how long to lock after unlocking
4)After installation, touch sensing keyboard, screen no respondIn this case, first check that the positive and negative electrodes of the battery have been installed upside down, whether the battery has enough powerRemove the back panel and see if it’s connected.To eliminate the above situation, you need to remove the lock ,check whether the wires of the lock body are squeezed, and the re-wire.
5)Unable to register fingerprintCheck the fingers for dirt or wear, check the fingerprint head on the lock for dirt and oil stains, etc. Check to see if the fingerprint is working properly(Press to see if there is any responds.
6)What is the reason why the smart lock consumes fast power?Large standby power consumptionShort circuit
7)There is no response to pressing the handle on outside the door, and there is unlock normally on inside the door, but the verification is normal, and the motor is normal.It may be the triangle direction on the clutch was error, please check correction.
8)How many times will the passcode be locked? How long is it locked?Enter the wrong password more than 5 times in a row, the keyboard is locked for 5 mins, Other ways to can open the door

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.