Accessibility:
Contact VIZIO for accessibility support at:
Email: accessibility@vizio.com
Phone: 1-877-698-4746
IMPORTANT SAFETY INSTRUCTIONS:
Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference.
- Heed all warnings.
- Follow all instructions.
- Do not use this Unit near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other Unit (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at the ends where the plug is located, near convenience receptacles, or where they exit from the Unit.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the stand, tripod, or bracket specified by the manufacturer, or sold with the Unit. When a cart is used, use caution when moving the cart/Unit combination to avoid injury from tip-over.
- Unplug this Unit during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the Unit has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the Unit, the Unit has been exposed to rain or moisture, does not operate normally, or has been dropped.
- To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your Unit.
- Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not use a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners.
Package Contents:
- VIZIO Sound Bar
- Remote Control with 2x AAA Batteries
- Power Cable
- Stereo RCA to 3.5mm Audio Cable
- 3.5mm to 3.5mm Audio Cable
- Digital Optical Cable
- 2x Wall Mount Brackets (Sound Bar)
- Wall Mount Template
- 2 x Wall
- Mount Screws
- User Manual
- Quick Setup Steps
Controls & Connections:
Back of Sound Bar:
Controls & Connections:
First-time Setup:
- Choose the best possible connection cable type and connect it to your TV.
- Connect the power cable to the sound bar AC IN as shown. Plug the power cable into an electrical outlet.
- Remove the battery cover by gently sliding it away from the remote.
- Insert the included batteries and gently slide the battery cover back into place.
- After turning on both your TV and sound bar, it will automatically begin searching for an active input.* The LED indicator on the front of the sound bar will begin cycling in different colors through inputs until an audio source is detected.
Using the Remote:
Proper Placement:
For the best sound experience, position the sound bar as shown. The sound bar should be close to ear level.
Mode & Level Settings:
The LED indicators will behave differently with each function
Mode & Level Settings:
Using Button Combinations:
There are other functions that are triggered by different button combinations on the sound bar.
Bluetooth Pairing:
- Press and hold the Bluetooth button ‘B’ on the sound bar or remote control for three (3) seconds.
- Search for the sound bar (VIZIO SB3620n) using your Bluetooth device. For more information, refer to the user documentation that came with the device.
- Now you can play audio from your Bluetooth device. Volume can be controlled on both your source device and the sound bar.
Using Bluetooth Mode:
- Your sound bar supports music streaming from devices with Bluetooth capability. (Device compatibility will vary, see your device’s documentation for more information.)
- Once you have paired your source device to the sound bar your device should remain paired (within range).
- If the source is changed back to Bluetooth, any paired Bluetooth device will reconnect automatically.
- If the input is changed, the Bluetooth device will disconnect.
Advanced Setup:
Specifications:
| Sound Bar: | One 1.77″ x 3.70″ (45 x 94 mm) Full Range Driver for each channel (1 for left, 1 for right, ) | |
| Connections: | One 3.5mm Stereo Audio One Optical (Toslink) | Bluetooth One USB (Supports .WAV and .MP3 format only) |
| Sound Pressure Level* (System): | 96 dB | |
| Frequency Response (System): | 50 Hz – 20 KHz | |
| Voltage: | 100-240Vac, 50/60Hz | |
| Compliances: | UL 62368-1, FCC PART15 Class B, Energy Star |
Note: To read the complete user manual, please download the following file: